Changes between Version 7 and Version 8 of OverSimReaSE

Timestamp:

Nov 3, 2010, 9:41:46 PM (14 years ago)

Author:

Ingmar Baumgart

Comment:

--

OverSimReaSE

@@ -57 +57 @@
 
 3. Modify or deselect "AS-Level" parameters. The following parameters can be set:
-                Nodes: Number of autonomous systems generated.
-                Transit-Node-Thresh: Minimum node degree to be a transit AS.
-                Parameter P: PFP Growing Parameter.
-                Parameter Delta: PFP Growing Parameter.
+   * Nodes: Number of autonomous systems generated.
+   * Transit-Node-Thresh: Minimum node degree to be a transit AS.
+   * Parameter P: PFP Growing Parameter.
+   * Parameter Delta: PFP Growing Parameter.
 
 4. Modify "Router-Level" parameters: The following parameters can be set:
-                Min Nodes: Minimum routers nodes per router topology.
-                Max Nodes: Maximum routers nodes per router topology.
-                Core Ratio: Percentage of core router nodes per router topology.
-                Core Cross Link Ratio: Percentage of core cross links.
-                Min Hosts per Edge: Minimum number of hosts per edge router.
-                Max Hosts per Edge: Maximum number of hosts per edge router.
+   * Min Nodes: Minimum routers nodes per router topology.
+   * Max Nodes: Maximum routers nodes per router topology.
+   * Core Ratio: Percentage of core router nodes per router topology.
+   * Core Cross Link Ratio: Percentage of core cross links.
+   * Min Hosts per Edge: Minimum number of hosts per edge router.
+   * Max Hosts per Edge: Maximum number of hosts per edge router.
 
-        IMPORTANT NOTE: In order to use the generated topology with the ReaSEUnderlay "Router-Level" option must not be deselected.
+   * ''IMPORTANT NOTE'': In order to use the generated topology with the ReaSEUnderlay "Router-Level" option must not be deselected.
 
-        NOTE: If the minimum number of Hosts per Edge is not zero ReaSE must be installed and included in OverSim to use the topology.
+   * ''NOTE'': If the minimum number of Hosts per Edge is not zero ReaSE must be installed and included in !OverSim to use the topology.
 
 5. Choose name and path of the ned file by pressing "select". e.g. ~/sim/generatedTopologies/MyFirstTopology.ned
-        NOTE: The name of the ned file will also be the name of the topology.
+   * ''NOTE'': The name of the ned file will also be the name of the topology.
 
 6. Select the "OverSim topology" option.
@@ -81 +81 @@
 7. Press "Run" in the upper right corner of the panel. Wait a few seconds while the TGM is trying multiple times to generate the topology.
 
+
 === Modified bandwiths, latencies, server and router fractions ===
 
-        1. Switch to the "Server Settings" panel.
-        2. Press "Set Script Path" and select ~/sim/ReaSEGUI/UtilScripts/setServer.pl .
-        3. Press "Save" and select a location to save your parameter settings.
-        4. Modify parameters or press "Default".
-        5. Press "Run" in the upper right corner of the panel.
+1. Switch to the "Server Settings" panel.
 
-        NOTE: The script writes the modified topology to a new file. e.g. ~/sim/generatedTopologies/MyFirstTopology_servers.ned
+2. Press "Set Script Path" and select ~/sim/ReaSEGUI/UtilScripts/setServer.pl' .
 
+3. Press "Save" and select a location to save your parameter settings.
+
+4. Modify parameters or press "Default".
+
+5. Press "Run" in the upper right corner of the panel.
+   * ''NOTE'': The script writes the modified topology to a new file. e.g. {{{~/sim/generatedTopologies/MyFirstTopology_servers.ned}}}
+