Compound Module Internet

Package: oversim.underlay.reaseunderlay.topologies.topology_tiny_oversim
File: src/underlay/reaseunderlay/topologies/topology_tiny_oversim/topology_tiny_oversim.ned

(no description)

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram. Click here to see the full picture.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram. Click here to see the full picture.

Extends:

Name	Type	Description
ReaSEUnderlayNetworkBase	compound module	The InetUnderlay ned-file See also: ReaSEUnderlayConfigurator

Name

Type

Description

ReaSEUnderlayNetworkBase

compound module

The InetUnderlay ned-file

See also: ReaSEUnderlayConfigurator

Known subclasses:

Name	Type	Description
ReaSEUnderlayNetwork	network	(no description)

Parameters:

Name	Type	Description
overlayType	string	the overlay used in the simulation (for overlayBackboneRouters)
tier1Type	string	the application on top of the overlay used in the simulation (for overlayBackboneRouters)
tier2Type	string	the module type on top of tier 1 (for overlayBackboneRouters)
tier3Type	string	the module type on top of tier 2 (for overlayBackboneRouters)

Properties:

Name	Value	Description
display	bgl=49;bgb=631,441
Internet

Unassigned submodule parameters:

Name	Type	Default value	Description
underlayConfigurator.terminalTypes	string		list of terminal types
underlayConfigurator.churnGeneratorTypes	string		a list of churn generators to be used
underlayConfigurator.transitionTime	double		time to wait before measuring after init phase is finished
underlayConfigurator.measurementTime	double		duration of the simulation after init and transition phase
underlayConfigurator.gracefulLeaveDelay	double		time between prekill and removal from overlay
underlayConfigurator.gracefulLeaveProbability	double		probability of gracefull leave
globalObserver.globalNodeList.maliciousNodeProbability	double		probability for a node to be malicious on creation
globalObserver.globalNodeList.maliciousNodeChange	bool		dynamically change number of malicious nodes
globalObserver.globalNodeList.maliciousNodeChangeStartTime	double		simTime at which nodes begin to become malicious
globalObserver.globalNodeList.maliciousNodeChangeRate	double		number of nodes to change to malicious compared to all nodes
globalObserver.globalNodeList.maliciousNodeChangeInterval	double		time between two node changes to malicious
globalObserver.globalNodeList.maliciousNodeChangeStartValue	double		minimum amount of malicious nodes in the peerSet
globalObserver.globalNodeList.maliciousNodeChangeStopValue	double		maximum amount of malicious nodes in the peerSet
globalObserver.globalNodeList.maxNumberOfKeys	int		maximum number of overlay keys the bootstrap oracle handles
globalObserver.globalNodeList.keyProbability	double		probability of keys to be owned by nodes
globalObserver.globalParameters.rpcUdpTimeout	double		default timeout value for direct RPCs
globalObserver.globalParameters.rpcKeyTimeout	double		default timeout value for routed RPCs
globalObserver.globalParameters.printStateToStdOut	bool		print overlay ready messages to std::cout
globalObserver.globalParameters.topologyAdaptation	bool		turn on topologyAdaptation (for demonstrator)
globalObserver.globalTraceManager.traceFile	string		file name of the trace file
globalObserver.globalStatistics.outputMinMax	bool		enable output of minimum and maximum for scalars
globalObserver.globalStatistics.outputStdDev	bool		enable output of standard deviation for scalars
globalObserver.globalStatistics.measureNetwInitPhase	bool		fetch statistics in init phase?
globalObserver.globalStatistics.globalStatTimerInterval	double		interval length of periodic statistic timer
churnGenerator.targetOverlayTerminalNum	int		number of nodes after init phase
churnGenerator.initPhaseCreationInterval	double		node creation interval in init phase
churnGenerator.noChurnThreshold	double		if the lifetimeMean of a specific churn generator exceeds this, NoChurn is used instead
churnGenerator.channelTypes	string		used (tx) access technologies (from common/channels.ned)
churnGenerator.channelTypesRx	string		used (rx) access technologies (from common/channels.ned)
TerminalConnector.channelTypes	string		list of (tx) channel types (from common/channels.ned)
TerminalConnector.channelTypesRx	string		list of (rx) channel types (from common/channels.ned)
TerminalConnector.channelDiversity	double	0	percentage a channel delay can differ from the channel type value
tas0.core0.networkLayer.ip.procDelay	double	0s
tas0.core0.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.core0.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.core0.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.core0.ppp.ppp.mtu	int	4470
tas0.core0.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.core0.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.core0.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.core0.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.core0.eth.mac.mtu	int	1500
tas0.gw1.networkLayer.ip.procDelay	double	0s
tas0.gw1.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.gw1.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.gw1.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.gw1.ppp.ppp.mtu	int	4470
tas0.gw1.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.gw1.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.gw1.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.gw1.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.gw1.eth.mac.mtu	int	1500
tas0.edge2.networkLayer.ip.procDelay	double	0s
tas0.edge2.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.edge2.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.edge2.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.edge2.ppp.ppp.mtu	int	4470
tas0.edge2.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.edge2.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.edge2.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.edge2.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.edge2.eth.mac.mtu	int	1500
tas0.edge3.networkLayer.ip.procDelay	double	0s
tas0.edge3.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.edge3.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.edge3.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.edge3.ppp.ppp.mtu	int	4470
tas0.edge3.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.edge3.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.edge3.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.edge3.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.edge3.eth.mac.mtu	int	1500
tas0.edge4.networkLayer.ip.procDelay	double	0s
tas0.edge4.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.edge4.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.edge4.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.edge4.ppp.ppp.mtu	int	4470
tas0.edge4.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.edge4.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.edge4.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.edge4.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.edge4.eth.mac.mtu	int	1500
tas0.edge5.networkLayer.ip.procDelay	double	0s
tas0.edge5.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.edge5.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.edge5.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.edge5.ppp.ppp.mtu	int	4470
tas0.edge5.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.edge5.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.edge5.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.edge5.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.edge5.eth.mac.mtu	int	1500
tas0.edge6.networkLayer.ip.procDelay	double	0s
tas0.edge6.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.edge6.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.edge6.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.edge6.ppp.ppp.mtu	int	4470
tas0.edge6.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.edge6.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.edge6.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.edge6.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.edge6.eth.mac.mtu	int	1500
tas0.host7.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host7.sctp.rtoInitial	double	3s
tas0.host7.sctp.rtoMin	double	1s
tas0.host7.sctp.rtoMax	double	60s
tas0.host7.sctp.rtoAlpha	double	0.125
tas0.host7.sctp.rtoBeta	double	0.250
tas0.host7.sctp.maxBurst	int	4
tas0.host7.sctp.assocMaxRetrans	int	10
tas0.host7.sctp.pathMaxRetrans	int	5
tas0.host7.sctp.maxInitRetrans	int	8
tas0.host7.sctp.sackPeriod	double	200ms
tas0.host7.sctp.sackFrequency	int	2
tas0.host7.sctp.reactivatePrimaryPath	bool	false
tas0.host7.sctp.sendQueueLimit	int	0
tas0.host7.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host7.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host7.sctp.hbInterval	double	30s
tas0.host7.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host7.sctp.naglePoint	int	1468
tas0.host7.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host7.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host7.sctp.ccModule	int	0	RFC4960=0
tas0.host7.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host7.sctp.arwnd	int	65535
tas0.host7.sctp.swsLimit	int	3000	Limit for SWS
tas0.host7.sctp.udpEncapsEnabled	bool	false
tas0.host7.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host7.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host7.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host7.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host7.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host7.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host7.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host7.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host7.pingApp.printPing	bool	true	dump on stdout
tas0.host7.networkLayer.ip.procDelay	double	0s
tas0.host7.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host7.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host7.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host7.ppp.ppp.mtu	int	4470
tas0.host7.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host7.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host7.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host7.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host7.eth.mac.mtu	int	1500
tas0.host7.ext.filterString	string
tas0.host7.ext.device	string
tas0.host7.ext.mtu	int	1500
tas0.host7.tcpdump.dumpFile	string	""
tas0.host7.tcpdump.threadEnable	bool	false
tas0.host7.tcpdump.snaplen	int	65535
tas0.host7.tcpdump.verbosity	int	0
tas0.host8.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host8.sctp.rtoInitial	double	3s
tas0.host8.sctp.rtoMin	double	1s
tas0.host8.sctp.rtoMax	double	60s
tas0.host8.sctp.rtoAlpha	double	0.125
tas0.host8.sctp.rtoBeta	double	0.250
tas0.host8.sctp.maxBurst	int	4
tas0.host8.sctp.assocMaxRetrans	int	10
tas0.host8.sctp.pathMaxRetrans	int	5
tas0.host8.sctp.maxInitRetrans	int	8
tas0.host8.sctp.sackPeriod	double	200ms
tas0.host8.sctp.sackFrequency	int	2
tas0.host8.sctp.reactivatePrimaryPath	bool	false
tas0.host8.sctp.sendQueueLimit	int	0
tas0.host8.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host8.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host8.sctp.hbInterval	double	30s
tas0.host8.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host8.sctp.naglePoint	int	1468
tas0.host8.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host8.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host8.sctp.ccModule	int	0	RFC4960=0
tas0.host8.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host8.sctp.arwnd	int	65535
tas0.host8.sctp.swsLimit	int	3000	Limit for SWS
tas0.host8.sctp.udpEncapsEnabled	bool	false
tas0.host8.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host8.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host8.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host8.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host8.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host8.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host8.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host8.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host8.pingApp.printPing	bool	true	dump on stdout
tas0.host8.networkLayer.ip.procDelay	double	0s
tas0.host8.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host8.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host8.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host8.ppp.ppp.mtu	int	4470
tas0.host8.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host8.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host8.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host8.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host8.eth.mac.mtu	int	1500
tas0.host8.ext.filterString	string
tas0.host8.ext.device	string
tas0.host8.ext.mtu	int	1500
tas0.host8.tcpdump.dumpFile	string	""
tas0.host8.tcpdump.threadEnable	bool	false
tas0.host8.tcpdump.snaplen	int	65535
tas0.host8.tcpdump.verbosity	int	0
tas0.host9.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host9.sctp.rtoInitial	double	3s
tas0.host9.sctp.rtoMin	double	1s
tas0.host9.sctp.rtoMax	double	60s
tas0.host9.sctp.rtoAlpha	double	0.125
tas0.host9.sctp.rtoBeta	double	0.250
tas0.host9.sctp.maxBurst	int	4
tas0.host9.sctp.assocMaxRetrans	int	10
tas0.host9.sctp.pathMaxRetrans	int	5
tas0.host9.sctp.maxInitRetrans	int	8
tas0.host9.sctp.sackPeriod	double	200ms
tas0.host9.sctp.sackFrequency	int	2
tas0.host9.sctp.reactivatePrimaryPath	bool	false
tas0.host9.sctp.sendQueueLimit	int	0
tas0.host9.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host9.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host9.sctp.hbInterval	double	30s
tas0.host9.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host9.sctp.naglePoint	int	1468
tas0.host9.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host9.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host9.sctp.ccModule	int	0	RFC4960=0
tas0.host9.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host9.sctp.arwnd	int	65535
tas0.host9.sctp.swsLimit	int	3000	Limit for SWS
tas0.host9.sctp.udpEncapsEnabled	bool	false
tas0.host9.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host9.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host9.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host9.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host9.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host9.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host9.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host9.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host9.pingApp.printPing	bool	true	dump on stdout
tas0.host9.networkLayer.ip.procDelay	double	0s
tas0.host9.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host9.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host9.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host9.ppp.ppp.mtu	int	4470
tas0.host9.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host9.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host9.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host9.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host9.eth.mac.mtu	int	1500
tas0.host9.ext.filterString	string
tas0.host9.ext.device	string
tas0.host9.ext.mtu	int	1500
tas0.host9.tcpdump.dumpFile	string	""
tas0.host9.tcpdump.threadEnable	bool	false
tas0.host9.tcpdump.snaplen	int	65535
tas0.host9.tcpdump.verbosity	int	0
tas0.host10.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host10.sctp.rtoInitial	double	3s
tas0.host10.sctp.rtoMin	double	1s
tas0.host10.sctp.rtoMax	double	60s
tas0.host10.sctp.rtoAlpha	double	0.125
tas0.host10.sctp.rtoBeta	double	0.250
tas0.host10.sctp.maxBurst	int	4
tas0.host10.sctp.assocMaxRetrans	int	10
tas0.host10.sctp.pathMaxRetrans	int	5
tas0.host10.sctp.maxInitRetrans	int	8
tas0.host10.sctp.sackPeriod	double	200ms
tas0.host10.sctp.sackFrequency	int	2
tas0.host10.sctp.reactivatePrimaryPath	bool	false
tas0.host10.sctp.sendQueueLimit	int	0
tas0.host10.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host10.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host10.sctp.hbInterval	double	30s
tas0.host10.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host10.sctp.naglePoint	int	1468
tas0.host10.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host10.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host10.sctp.ccModule	int	0	RFC4960=0
tas0.host10.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host10.sctp.arwnd	int	65535
tas0.host10.sctp.swsLimit	int	3000	Limit for SWS
tas0.host10.sctp.udpEncapsEnabled	bool	false
tas0.host10.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host10.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host10.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host10.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host10.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host10.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host10.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host10.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host10.pingApp.printPing	bool	true	dump on stdout
tas0.host10.networkLayer.ip.procDelay	double	0s
tas0.host10.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host10.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host10.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host10.ppp.ppp.mtu	int	4470
tas0.host10.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host10.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host10.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host10.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host10.eth.mac.mtu	int	1500
tas0.host10.ext.filterString	string
tas0.host10.ext.device	string
tas0.host10.ext.mtu	int	1500
tas0.host10.tcpdump.dumpFile	string	""
tas0.host10.tcpdump.threadEnable	bool	false
tas0.host10.tcpdump.snaplen	int	65535
tas0.host10.tcpdump.verbosity	int	0
tas0.host11.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host11.sctp.rtoInitial	double	3s
tas0.host11.sctp.rtoMin	double	1s
tas0.host11.sctp.rtoMax	double	60s
tas0.host11.sctp.rtoAlpha	double	0.125
tas0.host11.sctp.rtoBeta	double	0.250
tas0.host11.sctp.maxBurst	int	4
tas0.host11.sctp.assocMaxRetrans	int	10
tas0.host11.sctp.pathMaxRetrans	int	5
tas0.host11.sctp.maxInitRetrans	int	8
tas0.host11.sctp.sackPeriod	double	200ms
tas0.host11.sctp.sackFrequency	int	2
tas0.host11.sctp.reactivatePrimaryPath	bool	false
tas0.host11.sctp.sendQueueLimit	int	0
tas0.host11.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host11.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host11.sctp.hbInterval	double	30s
tas0.host11.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host11.sctp.naglePoint	int	1468
tas0.host11.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host11.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host11.sctp.ccModule	int	0	RFC4960=0
tas0.host11.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host11.sctp.arwnd	int	65535
tas0.host11.sctp.swsLimit	int	3000	Limit for SWS
tas0.host11.sctp.udpEncapsEnabled	bool	false
tas0.host11.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host11.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host11.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host11.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host11.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host11.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host11.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host11.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host11.pingApp.printPing	bool	true	dump on stdout
tas0.host11.networkLayer.ip.procDelay	double	0s
tas0.host11.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host11.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host11.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host11.ppp.ppp.mtu	int	4470
tas0.host11.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host11.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host11.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host11.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host11.eth.mac.mtu	int	1500
tas0.host11.ext.filterString	string
tas0.host11.ext.device	string
tas0.host11.ext.mtu	int	1500
tas0.host11.tcpdump.dumpFile	string	""
tas0.host11.tcpdump.threadEnable	bool	false
tas0.host11.tcpdump.snaplen	int	65535
tas0.host11.tcpdump.verbosity	int	0
tas0.host12.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host12.sctp.rtoInitial	double	3s
tas0.host12.sctp.rtoMin	double	1s
tas0.host12.sctp.rtoMax	double	60s
tas0.host12.sctp.rtoAlpha	double	0.125
tas0.host12.sctp.rtoBeta	double	0.250
tas0.host12.sctp.maxBurst	int	4
tas0.host12.sctp.assocMaxRetrans	int	10
tas0.host12.sctp.pathMaxRetrans	int	5
tas0.host12.sctp.maxInitRetrans	int	8
tas0.host12.sctp.sackPeriod	double	200ms
tas0.host12.sctp.sackFrequency	int	2
tas0.host12.sctp.reactivatePrimaryPath	bool	false
tas0.host12.sctp.sendQueueLimit	int	0
tas0.host12.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host12.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host12.sctp.hbInterval	double	30s
tas0.host12.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host12.sctp.naglePoint	int	1468
tas0.host12.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host12.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host12.sctp.ccModule	int	0	RFC4960=0
tas0.host12.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host12.sctp.arwnd	int	65535
tas0.host12.sctp.swsLimit	int	3000	Limit for SWS
tas0.host12.sctp.udpEncapsEnabled	bool	false
tas0.host12.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host12.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host12.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host12.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host12.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host12.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host12.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host12.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host12.pingApp.printPing	bool	true	dump on stdout
tas0.host12.networkLayer.ip.procDelay	double	0s
tas0.host12.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host12.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host12.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host12.ppp.ppp.mtu	int	4470
tas0.host12.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host12.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host12.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host12.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host12.eth.mac.mtu	int	1500
tas0.host12.ext.filterString	string
tas0.host12.ext.device	string
tas0.host12.ext.mtu	int	1500
tas0.host12.tcpdump.dumpFile	string	""
tas0.host12.tcpdump.threadEnable	bool	false
tas0.host12.tcpdump.snaplen	int	65535
tas0.host12.tcpdump.verbosity	int	0
tas0.host13.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host13.sctp.rtoInitial	double	3s
tas0.host13.sctp.rtoMin	double	1s
tas0.host13.sctp.rtoMax	double	60s
tas0.host13.sctp.rtoAlpha	double	0.125
tas0.host13.sctp.rtoBeta	double	0.250
tas0.host13.sctp.maxBurst	int	4
tas0.host13.sctp.assocMaxRetrans	int	10
tas0.host13.sctp.pathMaxRetrans	int	5
tas0.host13.sctp.maxInitRetrans	int	8
tas0.host13.sctp.sackPeriod	double	200ms
tas0.host13.sctp.sackFrequency	int	2
tas0.host13.sctp.reactivatePrimaryPath	bool	false
tas0.host13.sctp.sendQueueLimit	int	0
tas0.host13.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host13.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host13.sctp.hbInterval	double	30s
tas0.host13.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host13.sctp.naglePoint	int	1468
tas0.host13.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host13.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host13.sctp.ccModule	int	0	RFC4960=0
tas0.host13.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host13.sctp.arwnd	int	65535
tas0.host13.sctp.swsLimit	int	3000	Limit for SWS
tas0.host13.sctp.udpEncapsEnabled	bool	false
tas0.host13.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host13.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host13.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host13.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host13.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host13.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host13.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host13.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host13.pingApp.printPing	bool	true	dump on stdout
tas0.host13.networkLayer.ip.procDelay	double	0s
tas0.host13.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host13.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host13.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host13.ppp.ppp.mtu	int	4470
tas0.host13.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host13.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host13.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host13.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host13.eth.mac.mtu	int	1500
tas0.host13.ext.filterString	string
tas0.host13.ext.device	string
tas0.host13.ext.mtu	int	1500
tas0.host13.tcpdump.dumpFile	string	""
tas0.host13.tcpdump.threadEnable	bool	false
tas0.host13.tcpdump.snaplen	int	65535
tas0.host13.tcpdump.verbosity	int	0
tas0.host14.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host14.sctp.rtoInitial	double	3s
tas0.host14.sctp.rtoMin	double	1s
tas0.host14.sctp.rtoMax	double	60s
tas0.host14.sctp.rtoAlpha	double	0.125
tas0.host14.sctp.rtoBeta	double	0.250
tas0.host14.sctp.maxBurst	int	4
tas0.host14.sctp.assocMaxRetrans	int	10
tas0.host14.sctp.pathMaxRetrans	int	5
tas0.host14.sctp.maxInitRetrans	int	8
tas0.host14.sctp.sackPeriod	double	200ms
tas0.host14.sctp.sackFrequency	int	2
tas0.host14.sctp.reactivatePrimaryPath	bool	false
tas0.host14.sctp.sendQueueLimit	int	0
tas0.host14.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host14.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host14.sctp.hbInterval	double	30s
tas0.host14.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host14.sctp.naglePoint	int	1468
tas0.host14.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host14.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host14.sctp.ccModule	int	0	RFC4960=0
tas0.host14.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host14.sctp.arwnd	int	65535
tas0.host14.sctp.swsLimit	int	3000	Limit for SWS
tas0.host14.sctp.udpEncapsEnabled	bool	false
tas0.host14.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host14.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host14.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host14.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host14.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host14.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host14.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host14.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host14.pingApp.printPing	bool	true	dump on stdout
tas0.host14.networkLayer.ip.procDelay	double	0s
tas0.host14.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host14.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host14.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host14.ppp.ppp.mtu	int	4470
tas0.host14.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host14.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host14.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host14.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host14.eth.mac.mtu	int	1500
tas0.host14.ext.filterString	string
tas0.host14.ext.device	string
tas0.host14.ext.mtu	int	1500
tas0.host14.tcpdump.dumpFile	string	""
tas0.host14.tcpdump.threadEnable	bool	false
tas0.host14.tcpdump.snaplen	int	65535
tas0.host14.tcpdump.verbosity	int	0
tas0.host15.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host15.sctp.rtoInitial	double	3s
tas0.host15.sctp.rtoMin	double	1s
tas0.host15.sctp.rtoMax	double	60s
tas0.host15.sctp.rtoAlpha	double	0.125
tas0.host15.sctp.rtoBeta	double	0.250
tas0.host15.sctp.maxBurst	int	4
tas0.host15.sctp.assocMaxRetrans	int	10
tas0.host15.sctp.pathMaxRetrans	int	5
tas0.host15.sctp.maxInitRetrans	int	8
tas0.host15.sctp.sackPeriod	double	200ms
tas0.host15.sctp.sackFrequency	int	2
tas0.host15.sctp.reactivatePrimaryPath	bool	false
tas0.host15.sctp.sendQueueLimit	int	0
tas0.host15.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host15.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host15.sctp.hbInterval	double	30s
tas0.host15.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host15.sctp.naglePoint	int	1468
tas0.host15.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host15.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host15.sctp.ccModule	int	0	RFC4960=0
tas0.host15.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host15.sctp.arwnd	int	65535
tas0.host15.sctp.swsLimit	int	3000	Limit for SWS
tas0.host15.sctp.udpEncapsEnabled	bool	false
tas0.host15.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host15.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host15.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host15.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host15.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host15.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host15.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host15.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host15.pingApp.printPing	bool	true	dump on stdout
tas0.host15.networkLayer.ip.procDelay	double	0s
tas0.host15.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host15.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host15.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host15.ppp.ppp.mtu	int	4470
tas0.host15.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host15.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host15.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host15.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host15.eth.mac.mtu	int	1500
tas0.host15.ext.filterString	string
tas0.host15.ext.device	string
tas0.host15.ext.mtu	int	1500
tas0.host15.tcpdump.dumpFile	string	""
tas0.host15.tcpdump.threadEnable	bool	false
tas0.host15.tcpdump.snaplen	int	65535
tas0.host15.tcpdump.verbosity	int	0
tas0.host16.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host16.sctp.rtoInitial	double	3s
tas0.host16.sctp.rtoMin	double	1s
tas0.host16.sctp.rtoMax	double	60s
tas0.host16.sctp.rtoAlpha	double	0.125
tas0.host16.sctp.rtoBeta	double	0.250
tas0.host16.sctp.maxBurst	int	4
tas0.host16.sctp.assocMaxRetrans	int	10
tas0.host16.sctp.pathMaxRetrans	int	5
tas0.host16.sctp.maxInitRetrans	int	8
tas0.host16.sctp.sackPeriod	double	200ms
tas0.host16.sctp.sackFrequency	int	2
tas0.host16.sctp.reactivatePrimaryPath	bool	false
tas0.host16.sctp.sendQueueLimit	int	0
tas0.host16.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host16.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host16.sctp.hbInterval	double	30s
tas0.host16.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host16.sctp.naglePoint	int	1468
tas0.host16.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host16.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host16.sctp.ccModule	int	0	RFC4960=0
tas0.host16.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host16.sctp.arwnd	int	65535
tas0.host16.sctp.swsLimit	int	3000	Limit for SWS
tas0.host16.sctp.udpEncapsEnabled	bool	false
tas0.host16.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host16.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host16.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host16.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host16.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host16.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host16.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host16.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host16.pingApp.printPing	bool	true	dump on stdout
tas0.host16.networkLayer.ip.procDelay	double	0s
tas0.host16.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host16.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host16.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host16.ppp.ppp.mtu	int	4470
tas0.host16.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host16.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host16.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host16.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host16.eth.mac.mtu	int	1500
tas0.host16.ext.filterString	string
tas0.host16.ext.device	string
tas0.host16.ext.mtu	int	1500
tas0.host16.tcpdump.dumpFile	string	""
tas0.host16.tcpdump.threadEnable	bool	false
tas0.host16.tcpdump.snaplen	int	65535
tas0.host16.tcpdump.verbosity	int	0
tas0.host17.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host17.sctp.rtoInitial	double	3s
tas0.host17.sctp.rtoMin	double	1s
tas0.host17.sctp.rtoMax	double	60s
tas0.host17.sctp.rtoAlpha	double	0.125
tas0.host17.sctp.rtoBeta	double	0.250
tas0.host17.sctp.maxBurst	int	4
tas0.host17.sctp.assocMaxRetrans	int	10
tas0.host17.sctp.pathMaxRetrans	int	5
tas0.host17.sctp.maxInitRetrans	int	8
tas0.host17.sctp.sackPeriod	double	200ms
tas0.host17.sctp.sackFrequency	int	2
tas0.host17.sctp.reactivatePrimaryPath	bool	false
tas0.host17.sctp.sendQueueLimit	int	0
tas0.host17.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host17.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host17.sctp.hbInterval	double	30s
tas0.host17.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host17.sctp.naglePoint	int	1468
tas0.host17.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host17.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host17.sctp.ccModule	int	0	RFC4960=0
tas0.host17.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host17.sctp.arwnd	int	65535
tas0.host17.sctp.swsLimit	int	3000	Limit for SWS
tas0.host17.sctp.udpEncapsEnabled	bool	false
tas0.host17.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host17.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host17.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host17.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host17.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host17.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host17.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host17.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host17.pingApp.printPing	bool	true	dump on stdout
tas0.host17.networkLayer.ip.procDelay	double	0s
tas0.host17.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host17.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host17.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host17.ppp.ppp.mtu	int	4470
tas0.host17.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host17.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host17.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host17.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host17.eth.mac.mtu	int	1500
tas0.host17.ext.filterString	string
tas0.host17.ext.device	string
tas0.host17.ext.mtu	int	1500
tas0.host17.tcpdump.dumpFile	string	""
tas0.host17.tcpdump.threadEnable	bool	false
tas0.host17.tcpdump.snaplen	int	65535
tas0.host17.tcpdump.verbosity	int	0
tas0.host18.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host18.sctp.rtoInitial	double	3s
tas0.host18.sctp.rtoMin	double	1s
tas0.host18.sctp.rtoMax	double	60s
tas0.host18.sctp.rtoAlpha	double	0.125
tas0.host18.sctp.rtoBeta	double	0.250
tas0.host18.sctp.maxBurst	int	4
tas0.host18.sctp.assocMaxRetrans	int	10
tas0.host18.sctp.pathMaxRetrans	int	5
tas0.host18.sctp.maxInitRetrans	int	8
tas0.host18.sctp.sackPeriod	double	200ms
tas0.host18.sctp.sackFrequency	int	2
tas0.host18.sctp.reactivatePrimaryPath	bool	false
tas0.host18.sctp.sendQueueLimit	int	0
tas0.host18.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host18.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host18.sctp.hbInterval	double	30s
tas0.host18.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host18.sctp.naglePoint	int	1468
tas0.host18.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host18.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host18.sctp.ccModule	int	0	RFC4960=0
tas0.host18.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host18.sctp.arwnd	int	65535
tas0.host18.sctp.swsLimit	int	3000	Limit for SWS
tas0.host18.sctp.udpEncapsEnabled	bool	false
tas0.host18.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host18.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host18.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host18.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host18.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host18.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host18.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host18.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host18.pingApp.printPing	bool	true	dump on stdout
tas0.host18.networkLayer.ip.procDelay	double	0s
tas0.host18.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host18.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host18.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host18.ppp.ppp.mtu	int	4470
tas0.host18.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host18.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host18.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host18.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host18.eth.mac.mtu	int	1500
tas0.host18.ext.filterString	string
tas0.host18.ext.device	string
tas0.host18.ext.mtu	int	1500
tas0.host18.tcpdump.dumpFile	string	""
tas0.host18.tcpdump.threadEnable	bool	false
tas0.host18.tcpdump.snaplen	int	65535
tas0.host18.tcpdump.verbosity	int	0
tas0.host19.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host19.sctp.rtoInitial	double	3s
tas0.host19.sctp.rtoMin	double	1s
tas0.host19.sctp.rtoMax	double	60s
tas0.host19.sctp.rtoAlpha	double	0.125
tas0.host19.sctp.rtoBeta	double	0.250
tas0.host19.sctp.maxBurst	int	4
tas0.host19.sctp.assocMaxRetrans	int	10
tas0.host19.sctp.pathMaxRetrans	int	5
tas0.host19.sctp.maxInitRetrans	int	8
tas0.host19.sctp.sackPeriod	double	200ms
tas0.host19.sctp.sackFrequency	int	2
tas0.host19.sctp.reactivatePrimaryPath	bool	false
tas0.host19.sctp.sendQueueLimit	int	0
tas0.host19.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host19.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host19.sctp.hbInterval	double	30s
tas0.host19.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host19.sctp.naglePoint	int	1468
tas0.host19.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host19.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host19.sctp.ccModule	int	0	RFC4960=0
tas0.host19.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host19.sctp.arwnd	int	65535
tas0.host19.sctp.swsLimit	int	3000	Limit for SWS
tas0.host19.sctp.udpEncapsEnabled	bool	false
tas0.host19.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host19.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host19.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host19.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host19.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host19.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host19.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host19.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host19.pingApp.printPing	bool	true	dump on stdout
tas0.host19.networkLayer.ip.procDelay	double	0s
tas0.host19.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host19.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host19.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host19.ppp.ppp.mtu	int	4470
tas0.host19.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host19.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host19.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host19.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host19.eth.mac.mtu	int	1500
tas0.host19.ext.filterString	string
tas0.host19.ext.device	string
tas0.host19.ext.mtu	int	1500
tas0.host19.tcpdump.dumpFile	string	""
tas0.host19.tcpdump.threadEnable	bool	false
tas0.host19.tcpdump.snaplen	int	65535
tas0.host19.tcpdump.verbosity	int	0
tas0.host20.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host20.sctp.rtoInitial	double	3s
tas0.host20.sctp.rtoMin	double	1s
tas0.host20.sctp.rtoMax	double	60s
tas0.host20.sctp.rtoAlpha	double	0.125
tas0.host20.sctp.rtoBeta	double	0.250
tas0.host20.sctp.maxBurst	int	4
tas0.host20.sctp.assocMaxRetrans	int	10
tas0.host20.sctp.pathMaxRetrans	int	5
tas0.host20.sctp.maxInitRetrans	int	8
tas0.host20.sctp.sackPeriod	double	200ms
tas0.host20.sctp.sackFrequency	int	2
tas0.host20.sctp.reactivatePrimaryPath	bool	false
tas0.host20.sctp.sendQueueLimit	int	0
tas0.host20.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host20.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host20.sctp.hbInterval	double	30s
tas0.host20.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host20.sctp.naglePoint	int	1468
tas0.host20.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host20.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host20.sctp.ccModule	int	0	RFC4960=0
tas0.host20.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host20.sctp.arwnd	int	65535
tas0.host20.sctp.swsLimit	int	3000	Limit for SWS
tas0.host20.sctp.udpEncapsEnabled	bool	false
tas0.host20.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host20.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host20.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host20.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host20.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host20.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host20.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host20.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host20.pingApp.printPing	bool	true	dump on stdout
tas0.host20.networkLayer.ip.procDelay	double	0s
tas0.host20.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host20.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host20.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host20.ppp.ppp.mtu	int	4470
tas0.host20.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host20.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host20.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host20.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host20.eth.mac.mtu	int	1500
tas0.host20.ext.filterString	string
tas0.host20.ext.device	string
tas0.host20.ext.mtu	int	1500
tas0.host20.tcpdump.dumpFile	string	""
tas0.host20.tcpdump.threadEnable	bool	false
tas0.host20.tcpdump.snaplen	int	65535
tas0.host20.tcpdump.verbosity	int	0
tas0.host21.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host21.sctp.rtoInitial	double	3s
tas0.host21.sctp.rtoMin	double	1s
tas0.host21.sctp.rtoMax	double	60s
tas0.host21.sctp.rtoAlpha	double	0.125
tas0.host21.sctp.rtoBeta	double	0.250
tas0.host21.sctp.maxBurst	int	4
tas0.host21.sctp.assocMaxRetrans	int	10
tas0.host21.sctp.pathMaxRetrans	int	5
tas0.host21.sctp.maxInitRetrans	int	8
tas0.host21.sctp.sackPeriod	double	200ms
tas0.host21.sctp.sackFrequency	int	2
tas0.host21.sctp.reactivatePrimaryPath	bool	false
tas0.host21.sctp.sendQueueLimit	int	0
tas0.host21.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host21.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host21.sctp.hbInterval	double	30s
tas0.host21.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host21.sctp.naglePoint	int	1468
tas0.host21.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host21.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host21.sctp.ccModule	int	0	RFC4960=0
tas0.host21.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host21.sctp.arwnd	int	65535
tas0.host21.sctp.swsLimit	int	3000	Limit for SWS
tas0.host21.sctp.udpEncapsEnabled	bool	false
tas0.host21.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host21.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host21.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host21.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host21.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host21.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host21.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host21.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host21.pingApp.printPing	bool	true	dump on stdout
tas0.host21.networkLayer.ip.procDelay	double	0s
tas0.host21.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host21.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host21.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host21.ppp.ppp.mtu	int	4470
tas0.host21.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host21.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host21.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host21.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host21.eth.mac.mtu	int	1500
tas0.host21.ext.filterString	string
tas0.host21.ext.device	string
tas0.host21.ext.mtu	int	1500
tas0.host21.tcpdump.dumpFile	string	""
tas0.host21.tcpdump.threadEnable	bool	false
tas0.host21.tcpdump.snaplen	int	65535
tas0.host21.tcpdump.verbosity	int	0
tas0.host22.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
tas0.host22.sctp.rtoInitial	double	3s
tas0.host22.sctp.rtoMin	double	1s
tas0.host22.sctp.rtoMax	double	60s
tas0.host22.sctp.rtoAlpha	double	0.125
tas0.host22.sctp.rtoBeta	double	0.250
tas0.host22.sctp.maxBurst	int	4
tas0.host22.sctp.assocMaxRetrans	int	10
tas0.host22.sctp.pathMaxRetrans	int	5
tas0.host22.sctp.maxInitRetrans	int	8
tas0.host22.sctp.sackPeriod	double	200ms
tas0.host22.sctp.sackFrequency	int	2
tas0.host22.sctp.reactivatePrimaryPath	bool	false
tas0.host22.sctp.sendQueueLimit	int	0
tas0.host22.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
tas0.host22.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
tas0.host22.sctp.hbInterval	double	30s
tas0.host22.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
tas0.host22.sctp.naglePoint	int	1468
tas0.host22.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
tas0.host22.sctp.sctpAlgorithmClass	string	"SCTPAlg"
tas0.host22.sctp.ccModule	int	0	RFC4960=0
tas0.host22.sctp.ssModule	int	0	ROUND_ROBIN=0
tas0.host22.sctp.arwnd	int	65535
tas0.host22.sctp.swsLimit	int	3000	Limit for SWS
tas0.host22.sctp.udpEncapsEnabled	bool	false
tas0.host22.pingApp.destAddr	string	""	destination IP or IPv6 address
tas0.host22.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
tas0.host22.pingApp.packetSize	double	56B	of ping payload, in bytes
tas0.host22.pingApp.interval	double	1s	time to wait between pings (can be random)
tas0.host22.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
tas0.host22.pingApp.count	double	0	stop after count ping requests, 0 means continuously
tas0.host22.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
tas0.host22.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
tas0.host22.pingApp.printPing	bool	true	dump on stdout
tas0.host22.networkLayer.ip.procDelay	double	0s
tas0.host22.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
tas0.host22.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
tas0.host22.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
tas0.host22.ppp.ppp.mtu	int	4470
tas0.host22.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
tas0.host22.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
tas0.host22.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
tas0.host22.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
tas0.host22.eth.mac.mtu	int	1500
tas0.host22.ext.filterString	string
tas0.host22.ext.device	string
tas0.host22.ext.mtu	int	1500
tas0.host22.tcpdump.dumpFile	string	""
tas0.host22.tcpdump.threadEnable	bool	false
tas0.host22.tcpdump.snaplen	int	65535
tas0.host22.tcpdump.verbosity	int	0
sas1.core0.networkLayer.ip.procDelay	double	0s
sas1.core0.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.core0.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.core0.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.core0.ppp.ppp.mtu	int	4470
sas1.core0.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.core0.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.core0.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.core0.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.core0.eth.mac.mtu	int	1500
sas1.gw1.networkLayer.ip.procDelay	double	0s
sas1.gw1.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.gw1.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.gw1.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.gw1.ppp.ppp.mtu	int	4470
sas1.gw1.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.gw1.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.gw1.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.gw1.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.gw1.eth.mac.mtu	int	1500
sas1.edge2.networkLayer.ip.procDelay	double	0s
sas1.edge2.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.edge2.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.edge2.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.edge2.ppp.ppp.mtu	int	4470
sas1.edge2.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.edge2.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.edge2.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.edge2.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.edge2.eth.mac.mtu	int	1500
sas1.edge3.networkLayer.ip.procDelay	double	0s
sas1.edge3.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.edge3.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.edge3.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.edge3.ppp.ppp.mtu	int	4470
sas1.edge3.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.edge3.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.edge3.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.edge3.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.edge3.eth.mac.mtu	int	1500
sas1.edge4.networkLayer.ip.procDelay	double	0s
sas1.edge4.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.edge4.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.edge4.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.edge4.ppp.ppp.mtu	int	4470
sas1.edge4.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.edge4.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.edge4.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.edge4.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.edge4.eth.mac.mtu	int	1500
sas1.edge5.networkLayer.ip.procDelay	double	0s
sas1.edge5.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.edge5.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.edge5.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.edge5.ppp.ppp.mtu	int	4470
sas1.edge5.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.edge5.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.edge5.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.edge5.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.edge5.eth.mac.mtu	int	1500
sas1.host6.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host6.sctp.rtoInitial	double	3s
sas1.host6.sctp.rtoMin	double	1s
sas1.host6.sctp.rtoMax	double	60s
sas1.host6.sctp.rtoAlpha	double	0.125
sas1.host6.sctp.rtoBeta	double	0.250
sas1.host6.sctp.maxBurst	int	4
sas1.host6.sctp.assocMaxRetrans	int	10
sas1.host6.sctp.pathMaxRetrans	int	5
sas1.host6.sctp.maxInitRetrans	int	8
sas1.host6.sctp.sackPeriod	double	200ms
sas1.host6.sctp.sackFrequency	int	2
sas1.host6.sctp.reactivatePrimaryPath	bool	false
sas1.host6.sctp.sendQueueLimit	int	0
sas1.host6.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host6.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host6.sctp.hbInterval	double	30s
sas1.host6.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host6.sctp.naglePoint	int	1468
sas1.host6.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host6.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host6.sctp.ccModule	int	0	RFC4960=0
sas1.host6.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host6.sctp.arwnd	int	65535
sas1.host6.sctp.swsLimit	int	3000	Limit for SWS
sas1.host6.sctp.udpEncapsEnabled	bool	false
sas1.host6.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host6.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host6.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host6.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host6.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host6.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host6.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host6.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host6.pingApp.printPing	bool	true	dump on stdout
sas1.host6.networkLayer.ip.procDelay	double	0s
sas1.host6.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host6.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host6.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host6.ppp.ppp.mtu	int	4470
sas1.host6.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host6.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host6.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host6.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host6.eth.mac.mtu	int	1500
sas1.host6.ext.filterString	string
sas1.host6.ext.device	string
sas1.host6.ext.mtu	int	1500
sas1.host6.tcpdump.dumpFile	string	""
sas1.host6.tcpdump.threadEnable	bool	false
sas1.host6.tcpdump.snaplen	int	65535
sas1.host6.tcpdump.verbosity	int	0
sas1.host7.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host7.sctp.rtoInitial	double	3s
sas1.host7.sctp.rtoMin	double	1s
sas1.host7.sctp.rtoMax	double	60s
sas1.host7.sctp.rtoAlpha	double	0.125
sas1.host7.sctp.rtoBeta	double	0.250
sas1.host7.sctp.maxBurst	int	4
sas1.host7.sctp.assocMaxRetrans	int	10
sas1.host7.sctp.pathMaxRetrans	int	5
sas1.host7.sctp.maxInitRetrans	int	8
sas1.host7.sctp.sackPeriod	double	200ms
sas1.host7.sctp.sackFrequency	int	2
sas1.host7.sctp.reactivatePrimaryPath	bool	false
sas1.host7.sctp.sendQueueLimit	int	0
sas1.host7.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host7.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host7.sctp.hbInterval	double	30s
sas1.host7.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host7.sctp.naglePoint	int	1468
sas1.host7.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host7.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host7.sctp.ccModule	int	0	RFC4960=0
sas1.host7.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host7.sctp.arwnd	int	65535
sas1.host7.sctp.swsLimit	int	3000	Limit for SWS
sas1.host7.sctp.udpEncapsEnabled	bool	false
sas1.host7.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host7.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host7.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host7.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host7.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host7.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host7.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host7.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host7.pingApp.printPing	bool	true	dump on stdout
sas1.host7.networkLayer.ip.procDelay	double	0s
sas1.host7.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host7.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host7.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host7.ppp.ppp.mtu	int	4470
sas1.host7.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host7.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host7.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host7.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host7.eth.mac.mtu	int	1500
sas1.host7.ext.filterString	string
sas1.host7.ext.device	string
sas1.host7.ext.mtu	int	1500
sas1.host7.tcpdump.dumpFile	string	""
sas1.host7.tcpdump.threadEnable	bool	false
sas1.host7.tcpdump.snaplen	int	65535
sas1.host7.tcpdump.verbosity	int	0
sas1.host8.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host8.sctp.rtoInitial	double	3s
sas1.host8.sctp.rtoMin	double	1s
sas1.host8.sctp.rtoMax	double	60s
sas1.host8.sctp.rtoAlpha	double	0.125
sas1.host8.sctp.rtoBeta	double	0.250
sas1.host8.sctp.maxBurst	int	4
sas1.host8.sctp.assocMaxRetrans	int	10
sas1.host8.sctp.pathMaxRetrans	int	5
sas1.host8.sctp.maxInitRetrans	int	8
sas1.host8.sctp.sackPeriod	double	200ms
sas1.host8.sctp.sackFrequency	int	2
sas1.host8.sctp.reactivatePrimaryPath	bool	false
sas1.host8.sctp.sendQueueLimit	int	0
sas1.host8.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host8.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host8.sctp.hbInterval	double	30s
sas1.host8.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host8.sctp.naglePoint	int	1468
sas1.host8.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host8.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host8.sctp.ccModule	int	0	RFC4960=0
sas1.host8.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host8.sctp.arwnd	int	65535
sas1.host8.sctp.swsLimit	int	3000	Limit for SWS
sas1.host8.sctp.udpEncapsEnabled	bool	false
sas1.host8.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host8.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host8.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host8.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host8.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host8.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host8.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host8.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host8.pingApp.printPing	bool	true	dump on stdout
sas1.host8.networkLayer.ip.procDelay	double	0s
sas1.host8.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host8.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host8.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host8.ppp.ppp.mtu	int	4470
sas1.host8.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host8.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host8.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host8.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host8.eth.mac.mtu	int	1500
sas1.host8.ext.filterString	string
sas1.host8.ext.device	string
sas1.host8.ext.mtu	int	1500
sas1.host8.tcpdump.dumpFile	string	""
sas1.host8.tcpdump.threadEnable	bool	false
sas1.host8.tcpdump.snaplen	int	65535
sas1.host8.tcpdump.verbosity	int	0
sas1.host9.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host9.sctp.rtoInitial	double	3s
sas1.host9.sctp.rtoMin	double	1s
sas1.host9.sctp.rtoMax	double	60s
sas1.host9.sctp.rtoAlpha	double	0.125
sas1.host9.sctp.rtoBeta	double	0.250
sas1.host9.sctp.maxBurst	int	4
sas1.host9.sctp.assocMaxRetrans	int	10
sas1.host9.sctp.pathMaxRetrans	int	5
sas1.host9.sctp.maxInitRetrans	int	8
sas1.host9.sctp.sackPeriod	double	200ms
sas1.host9.sctp.sackFrequency	int	2
sas1.host9.sctp.reactivatePrimaryPath	bool	false
sas1.host9.sctp.sendQueueLimit	int	0
sas1.host9.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host9.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host9.sctp.hbInterval	double	30s
sas1.host9.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host9.sctp.naglePoint	int	1468
sas1.host9.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host9.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host9.sctp.ccModule	int	0	RFC4960=0
sas1.host9.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host9.sctp.arwnd	int	65535
sas1.host9.sctp.swsLimit	int	3000	Limit for SWS
sas1.host9.sctp.udpEncapsEnabled	bool	false
sas1.host9.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host9.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host9.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host9.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host9.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host9.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host9.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host9.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host9.pingApp.printPing	bool	true	dump on stdout
sas1.host9.networkLayer.ip.procDelay	double	0s
sas1.host9.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host9.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host9.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host9.ppp.ppp.mtu	int	4470
sas1.host9.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host9.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host9.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host9.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host9.eth.mac.mtu	int	1500
sas1.host9.ext.filterString	string
sas1.host9.ext.device	string
sas1.host9.ext.mtu	int	1500
sas1.host9.tcpdump.dumpFile	string	""
sas1.host9.tcpdump.threadEnable	bool	false
sas1.host9.tcpdump.snaplen	int	65535
sas1.host9.tcpdump.verbosity	int	0
sas1.host10.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host10.sctp.rtoInitial	double	3s
sas1.host10.sctp.rtoMin	double	1s
sas1.host10.sctp.rtoMax	double	60s
sas1.host10.sctp.rtoAlpha	double	0.125
sas1.host10.sctp.rtoBeta	double	0.250
sas1.host10.sctp.maxBurst	int	4
sas1.host10.sctp.assocMaxRetrans	int	10
sas1.host10.sctp.pathMaxRetrans	int	5
sas1.host10.sctp.maxInitRetrans	int	8
sas1.host10.sctp.sackPeriod	double	200ms
sas1.host10.sctp.sackFrequency	int	2
sas1.host10.sctp.reactivatePrimaryPath	bool	false
sas1.host10.sctp.sendQueueLimit	int	0
sas1.host10.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host10.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host10.sctp.hbInterval	double	30s
sas1.host10.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host10.sctp.naglePoint	int	1468
sas1.host10.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host10.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host10.sctp.ccModule	int	0	RFC4960=0
sas1.host10.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host10.sctp.arwnd	int	65535
sas1.host10.sctp.swsLimit	int	3000	Limit for SWS
sas1.host10.sctp.udpEncapsEnabled	bool	false
sas1.host10.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host10.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host10.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host10.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host10.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host10.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host10.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host10.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host10.pingApp.printPing	bool	true	dump on stdout
sas1.host10.networkLayer.ip.procDelay	double	0s
sas1.host10.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host10.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host10.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host10.ppp.ppp.mtu	int	4470
sas1.host10.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host10.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host10.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host10.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host10.eth.mac.mtu	int	1500
sas1.host10.ext.filterString	string
sas1.host10.ext.device	string
sas1.host10.ext.mtu	int	1500
sas1.host10.tcpdump.dumpFile	string	""
sas1.host10.tcpdump.threadEnable	bool	false
sas1.host10.tcpdump.snaplen	int	65535
sas1.host10.tcpdump.verbosity	int	0
sas1.host11.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host11.sctp.rtoInitial	double	3s
sas1.host11.sctp.rtoMin	double	1s
sas1.host11.sctp.rtoMax	double	60s
sas1.host11.sctp.rtoAlpha	double	0.125
sas1.host11.sctp.rtoBeta	double	0.250
sas1.host11.sctp.maxBurst	int	4
sas1.host11.sctp.assocMaxRetrans	int	10
sas1.host11.sctp.pathMaxRetrans	int	5
sas1.host11.sctp.maxInitRetrans	int	8
sas1.host11.sctp.sackPeriod	double	200ms
sas1.host11.sctp.sackFrequency	int	2
sas1.host11.sctp.reactivatePrimaryPath	bool	false
sas1.host11.sctp.sendQueueLimit	int	0
sas1.host11.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host11.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host11.sctp.hbInterval	double	30s
sas1.host11.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host11.sctp.naglePoint	int	1468
sas1.host11.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host11.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host11.sctp.ccModule	int	0	RFC4960=0
sas1.host11.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host11.sctp.arwnd	int	65535
sas1.host11.sctp.swsLimit	int	3000	Limit for SWS
sas1.host11.sctp.udpEncapsEnabled	bool	false
sas1.host11.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host11.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host11.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host11.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host11.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host11.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host11.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host11.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host11.pingApp.printPing	bool	true	dump on stdout
sas1.host11.networkLayer.ip.procDelay	double	0s
sas1.host11.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host11.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host11.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host11.ppp.ppp.mtu	int	4470
sas1.host11.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host11.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host11.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host11.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host11.eth.mac.mtu	int	1500
sas1.host11.ext.filterString	string
sas1.host11.ext.device	string
sas1.host11.ext.mtu	int	1500
sas1.host11.tcpdump.dumpFile	string	""
sas1.host11.tcpdump.threadEnable	bool	false
sas1.host11.tcpdump.snaplen	int	65535
sas1.host11.tcpdump.verbosity	int	0
sas1.host12.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host12.sctp.rtoInitial	double	3s
sas1.host12.sctp.rtoMin	double	1s
sas1.host12.sctp.rtoMax	double	60s
sas1.host12.sctp.rtoAlpha	double	0.125
sas1.host12.sctp.rtoBeta	double	0.250
sas1.host12.sctp.maxBurst	int	4
sas1.host12.sctp.assocMaxRetrans	int	10
sas1.host12.sctp.pathMaxRetrans	int	5
sas1.host12.sctp.maxInitRetrans	int	8
sas1.host12.sctp.sackPeriod	double	200ms
sas1.host12.sctp.sackFrequency	int	2
sas1.host12.sctp.reactivatePrimaryPath	bool	false
sas1.host12.sctp.sendQueueLimit	int	0
sas1.host12.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host12.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host12.sctp.hbInterval	double	30s
sas1.host12.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host12.sctp.naglePoint	int	1468
sas1.host12.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host12.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host12.sctp.ccModule	int	0	RFC4960=0
sas1.host12.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host12.sctp.arwnd	int	65535
sas1.host12.sctp.swsLimit	int	3000	Limit for SWS
sas1.host12.sctp.udpEncapsEnabled	bool	false
sas1.host12.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host12.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host12.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host12.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host12.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host12.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host12.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host12.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host12.pingApp.printPing	bool	true	dump on stdout
sas1.host12.networkLayer.ip.procDelay	double	0s
sas1.host12.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host12.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host12.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host12.ppp.ppp.mtu	int	4470
sas1.host12.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host12.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host12.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host12.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host12.eth.mac.mtu	int	1500
sas1.host12.ext.filterString	string
sas1.host12.ext.device	string
sas1.host12.ext.mtu	int	1500
sas1.host12.tcpdump.dumpFile	string	""
sas1.host12.tcpdump.threadEnable	bool	false
sas1.host12.tcpdump.snaplen	int	65535
sas1.host12.tcpdump.verbosity	int	0
sas1.host13.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host13.sctp.rtoInitial	double	3s
sas1.host13.sctp.rtoMin	double	1s
sas1.host13.sctp.rtoMax	double	60s
sas1.host13.sctp.rtoAlpha	double	0.125
sas1.host13.sctp.rtoBeta	double	0.250
sas1.host13.sctp.maxBurst	int	4
sas1.host13.sctp.assocMaxRetrans	int	10
sas1.host13.sctp.pathMaxRetrans	int	5
sas1.host13.sctp.maxInitRetrans	int	8
sas1.host13.sctp.sackPeriod	double	200ms
sas1.host13.sctp.sackFrequency	int	2
sas1.host13.sctp.reactivatePrimaryPath	bool	false
sas1.host13.sctp.sendQueueLimit	int	0
sas1.host13.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host13.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host13.sctp.hbInterval	double	30s
sas1.host13.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host13.sctp.naglePoint	int	1468
sas1.host13.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host13.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host13.sctp.ccModule	int	0	RFC4960=0
sas1.host13.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host13.sctp.arwnd	int	65535
sas1.host13.sctp.swsLimit	int	3000	Limit for SWS
sas1.host13.sctp.udpEncapsEnabled	bool	false
sas1.host13.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host13.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host13.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host13.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host13.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host13.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host13.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host13.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host13.pingApp.printPing	bool	true	dump on stdout
sas1.host13.networkLayer.ip.procDelay	double	0s
sas1.host13.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host13.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host13.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host13.ppp.ppp.mtu	int	4470
sas1.host13.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host13.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host13.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host13.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host13.eth.mac.mtu	int	1500
sas1.host13.ext.filterString	string
sas1.host13.ext.device	string
sas1.host13.ext.mtu	int	1500
sas1.host13.tcpdump.dumpFile	string	""
sas1.host13.tcpdump.threadEnable	bool	false
sas1.host13.tcpdump.snaplen	int	65535
sas1.host13.tcpdump.verbosity	int	0
sas1.host14.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host14.sctp.rtoInitial	double	3s
sas1.host14.sctp.rtoMin	double	1s
sas1.host14.sctp.rtoMax	double	60s
sas1.host14.sctp.rtoAlpha	double	0.125
sas1.host14.sctp.rtoBeta	double	0.250
sas1.host14.sctp.maxBurst	int	4
sas1.host14.sctp.assocMaxRetrans	int	10
sas1.host14.sctp.pathMaxRetrans	int	5
sas1.host14.sctp.maxInitRetrans	int	8
sas1.host14.sctp.sackPeriod	double	200ms
sas1.host14.sctp.sackFrequency	int	2
sas1.host14.sctp.reactivatePrimaryPath	bool	false
sas1.host14.sctp.sendQueueLimit	int	0
sas1.host14.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host14.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host14.sctp.hbInterval	double	30s
sas1.host14.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host14.sctp.naglePoint	int	1468
sas1.host14.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host14.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host14.sctp.ccModule	int	0	RFC4960=0
sas1.host14.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host14.sctp.arwnd	int	65535
sas1.host14.sctp.swsLimit	int	3000	Limit for SWS
sas1.host14.sctp.udpEncapsEnabled	bool	false
sas1.host14.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host14.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host14.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host14.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host14.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host14.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host14.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host14.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host14.pingApp.printPing	bool	true	dump on stdout
sas1.host14.networkLayer.ip.procDelay	double	0s
sas1.host14.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host14.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host14.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host14.ppp.ppp.mtu	int	4470
sas1.host14.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host14.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host14.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host14.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host14.eth.mac.mtu	int	1500
sas1.host14.ext.filterString	string
sas1.host14.ext.device	string
sas1.host14.ext.mtu	int	1500
sas1.host14.tcpdump.dumpFile	string	""
sas1.host14.tcpdump.threadEnable	bool	false
sas1.host14.tcpdump.snaplen	int	65535
sas1.host14.tcpdump.verbosity	int	0
sas1.host15.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host15.sctp.rtoInitial	double	3s
sas1.host15.sctp.rtoMin	double	1s
sas1.host15.sctp.rtoMax	double	60s
sas1.host15.sctp.rtoAlpha	double	0.125
sas1.host15.sctp.rtoBeta	double	0.250
sas1.host15.sctp.maxBurst	int	4
sas1.host15.sctp.assocMaxRetrans	int	10
sas1.host15.sctp.pathMaxRetrans	int	5
sas1.host15.sctp.maxInitRetrans	int	8
sas1.host15.sctp.sackPeriod	double	200ms
sas1.host15.sctp.sackFrequency	int	2
sas1.host15.sctp.reactivatePrimaryPath	bool	false
sas1.host15.sctp.sendQueueLimit	int	0
sas1.host15.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host15.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host15.sctp.hbInterval	double	30s
sas1.host15.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host15.sctp.naglePoint	int	1468
sas1.host15.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host15.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host15.sctp.ccModule	int	0	RFC4960=0
sas1.host15.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host15.sctp.arwnd	int	65535
sas1.host15.sctp.swsLimit	int	3000	Limit for SWS
sas1.host15.sctp.udpEncapsEnabled	bool	false
sas1.host15.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host15.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host15.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host15.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host15.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host15.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host15.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host15.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host15.pingApp.printPing	bool	true	dump on stdout
sas1.host15.networkLayer.ip.procDelay	double	0s
sas1.host15.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host15.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host15.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host15.ppp.ppp.mtu	int	4470
sas1.host15.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host15.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host15.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host15.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host15.eth.mac.mtu	int	1500
sas1.host15.ext.filterString	string
sas1.host15.ext.device	string
sas1.host15.ext.mtu	int	1500
sas1.host15.tcpdump.dumpFile	string	""
sas1.host15.tcpdump.threadEnable	bool	false
sas1.host15.tcpdump.snaplen	int	65535
sas1.host15.tcpdump.verbosity	int	0
sas1.host16.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host16.sctp.rtoInitial	double	3s
sas1.host16.sctp.rtoMin	double	1s
sas1.host16.sctp.rtoMax	double	60s
sas1.host16.sctp.rtoAlpha	double	0.125
sas1.host16.sctp.rtoBeta	double	0.250
sas1.host16.sctp.maxBurst	int	4
sas1.host16.sctp.assocMaxRetrans	int	10
sas1.host16.sctp.pathMaxRetrans	int	5
sas1.host16.sctp.maxInitRetrans	int	8
sas1.host16.sctp.sackPeriod	double	200ms
sas1.host16.sctp.sackFrequency	int	2
sas1.host16.sctp.reactivatePrimaryPath	bool	false
sas1.host16.sctp.sendQueueLimit	int	0
sas1.host16.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host16.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host16.sctp.hbInterval	double	30s
sas1.host16.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host16.sctp.naglePoint	int	1468
sas1.host16.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host16.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host16.sctp.ccModule	int	0	RFC4960=0
sas1.host16.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host16.sctp.arwnd	int	65535
sas1.host16.sctp.swsLimit	int	3000	Limit for SWS
sas1.host16.sctp.udpEncapsEnabled	bool	false
sas1.host16.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host16.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host16.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host16.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host16.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host16.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host16.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host16.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host16.pingApp.printPing	bool	true	dump on stdout
sas1.host16.networkLayer.ip.procDelay	double	0s
sas1.host16.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host16.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host16.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host16.ppp.ppp.mtu	int	4470
sas1.host16.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host16.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host16.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host16.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host16.eth.mac.mtu	int	1500
sas1.host16.ext.filterString	string
sas1.host16.ext.device	string
sas1.host16.ext.mtu	int	1500
sas1.host16.tcpdump.dumpFile	string	""
sas1.host16.tcpdump.threadEnable	bool	false
sas1.host16.tcpdump.snaplen	int	65535
sas1.host16.tcpdump.verbosity	int	0
sas1.host17.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas1.host17.sctp.rtoInitial	double	3s
sas1.host17.sctp.rtoMin	double	1s
sas1.host17.sctp.rtoMax	double	60s
sas1.host17.sctp.rtoAlpha	double	0.125
sas1.host17.sctp.rtoBeta	double	0.250
sas1.host17.sctp.maxBurst	int	4
sas1.host17.sctp.assocMaxRetrans	int	10
sas1.host17.sctp.pathMaxRetrans	int	5
sas1.host17.sctp.maxInitRetrans	int	8
sas1.host17.sctp.sackPeriod	double	200ms
sas1.host17.sctp.sackFrequency	int	2
sas1.host17.sctp.reactivatePrimaryPath	bool	false
sas1.host17.sctp.sendQueueLimit	int	0
sas1.host17.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas1.host17.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas1.host17.sctp.hbInterval	double	30s
sas1.host17.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas1.host17.sctp.naglePoint	int	1468
sas1.host17.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas1.host17.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas1.host17.sctp.ccModule	int	0	RFC4960=0
sas1.host17.sctp.ssModule	int	0	ROUND_ROBIN=0
sas1.host17.sctp.arwnd	int	65535
sas1.host17.sctp.swsLimit	int	3000	Limit for SWS
sas1.host17.sctp.udpEncapsEnabled	bool	false
sas1.host17.pingApp.destAddr	string	""	destination IP or IPv6 address
sas1.host17.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas1.host17.pingApp.packetSize	double	56B	of ping payload, in bytes
sas1.host17.pingApp.interval	double	1s	time to wait between pings (can be random)
sas1.host17.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas1.host17.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas1.host17.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas1.host17.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas1.host17.pingApp.printPing	bool	true	dump on stdout
sas1.host17.networkLayer.ip.procDelay	double	0s
sas1.host17.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas1.host17.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas1.host17.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas1.host17.ppp.ppp.mtu	int	4470
sas1.host17.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas1.host17.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas1.host17.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas1.host17.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas1.host17.eth.mac.mtu	int	1500
sas1.host17.ext.filterString	string
sas1.host17.ext.device	string
sas1.host17.ext.mtu	int	1500
sas1.host17.tcpdump.dumpFile	string	""
sas1.host17.tcpdump.threadEnable	bool	false
sas1.host17.tcpdump.snaplen	int	65535
sas1.host17.tcpdump.verbosity	int	0
sas2.core0.networkLayer.ip.procDelay	double	0s
sas2.core0.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.core0.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.core0.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.core0.ppp.ppp.mtu	int	4470
sas2.core0.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.core0.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.core0.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.core0.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.core0.eth.mac.mtu	int	1500
sas2.gw1.networkLayer.ip.procDelay	double	0s
sas2.gw1.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.gw1.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.gw1.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.gw1.ppp.ppp.mtu	int	4470
sas2.gw1.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.gw1.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.gw1.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.gw1.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.gw1.eth.mac.mtu	int	1500
sas2.edge2.networkLayer.ip.procDelay	double	0s
sas2.edge2.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.edge2.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.edge2.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.edge2.ppp.ppp.mtu	int	4470
sas2.edge2.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.edge2.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.edge2.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.edge2.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.edge2.eth.mac.mtu	int	1500
sas2.edge3.networkLayer.ip.procDelay	double	0s
sas2.edge3.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.edge3.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.edge3.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.edge3.ppp.ppp.mtu	int	4470
sas2.edge3.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.edge3.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.edge3.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.edge3.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.edge3.eth.mac.mtu	int	1500
sas2.edge4.networkLayer.ip.procDelay	double	0s
sas2.edge4.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.edge4.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.edge4.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.edge4.ppp.ppp.mtu	int	4470
sas2.edge4.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.edge4.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.edge4.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.edge4.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.edge4.eth.mac.mtu	int	1500
sas2.edge5.networkLayer.ip.procDelay	double	0s
sas2.edge5.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.edge5.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.edge5.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.edge5.ppp.ppp.mtu	int	4470
sas2.edge5.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.edge5.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.edge5.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.edge5.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.edge5.eth.mac.mtu	int	1500
sas2.edge6.networkLayer.ip.procDelay	double	0s
sas2.edge6.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.edge6.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.edge6.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.edge6.ppp.ppp.mtu	int	4470
sas2.edge6.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.edge6.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.edge6.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.edge6.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.edge6.eth.mac.mtu	int	1500
sas2.host7.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host7.sctp.rtoInitial	double	3s
sas2.host7.sctp.rtoMin	double	1s
sas2.host7.sctp.rtoMax	double	60s
sas2.host7.sctp.rtoAlpha	double	0.125
sas2.host7.sctp.rtoBeta	double	0.250
sas2.host7.sctp.maxBurst	int	4
sas2.host7.sctp.assocMaxRetrans	int	10
sas2.host7.sctp.pathMaxRetrans	int	5
sas2.host7.sctp.maxInitRetrans	int	8
sas2.host7.sctp.sackPeriod	double	200ms
sas2.host7.sctp.sackFrequency	int	2
sas2.host7.sctp.reactivatePrimaryPath	bool	false
sas2.host7.sctp.sendQueueLimit	int	0
sas2.host7.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host7.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host7.sctp.hbInterval	double	30s
sas2.host7.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host7.sctp.naglePoint	int	1468
sas2.host7.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host7.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host7.sctp.ccModule	int	0	RFC4960=0
sas2.host7.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host7.sctp.arwnd	int	65535
sas2.host7.sctp.swsLimit	int	3000	Limit for SWS
sas2.host7.sctp.udpEncapsEnabled	bool	false
sas2.host7.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host7.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host7.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host7.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host7.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host7.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host7.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host7.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host7.pingApp.printPing	bool	true	dump on stdout
sas2.host7.networkLayer.ip.procDelay	double	0s
sas2.host7.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host7.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host7.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host7.ppp.ppp.mtu	int	4470
sas2.host7.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host7.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host7.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host7.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host7.eth.mac.mtu	int	1500
sas2.host7.ext.filterString	string
sas2.host7.ext.device	string
sas2.host7.ext.mtu	int	1500
sas2.host7.tcpdump.dumpFile	string	""
sas2.host7.tcpdump.threadEnable	bool	false
sas2.host7.tcpdump.snaplen	int	65535
sas2.host7.tcpdump.verbosity	int	0
sas2.host8.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host8.sctp.rtoInitial	double	3s
sas2.host8.sctp.rtoMin	double	1s
sas2.host8.sctp.rtoMax	double	60s
sas2.host8.sctp.rtoAlpha	double	0.125
sas2.host8.sctp.rtoBeta	double	0.250
sas2.host8.sctp.maxBurst	int	4
sas2.host8.sctp.assocMaxRetrans	int	10
sas2.host8.sctp.pathMaxRetrans	int	5
sas2.host8.sctp.maxInitRetrans	int	8
sas2.host8.sctp.sackPeriod	double	200ms
sas2.host8.sctp.sackFrequency	int	2
sas2.host8.sctp.reactivatePrimaryPath	bool	false
sas2.host8.sctp.sendQueueLimit	int	0
sas2.host8.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host8.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host8.sctp.hbInterval	double	30s
sas2.host8.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host8.sctp.naglePoint	int	1468
sas2.host8.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host8.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host8.sctp.ccModule	int	0	RFC4960=0
sas2.host8.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host8.sctp.arwnd	int	65535
sas2.host8.sctp.swsLimit	int	3000	Limit for SWS
sas2.host8.sctp.udpEncapsEnabled	bool	false
sas2.host8.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host8.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host8.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host8.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host8.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host8.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host8.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host8.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host8.pingApp.printPing	bool	true	dump on stdout
sas2.host8.networkLayer.ip.procDelay	double	0s
sas2.host8.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host8.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host8.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host8.ppp.ppp.mtu	int	4470
sas2.host8.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host8.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host8.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host8.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host8.eth.mac.mtu	int	1500
sas2.host8.ext.filterString	string
sas2.host8.ext.device	string
sas2.host8.ext.mtu	int	1500
sas2.host8.tcpdump.dumpFile	string	""
sas2.host8.tcpdump.threadEnable	bool	false
sas2.host8.tcpdump.snaplen	int	65535
sas2.host8.tcpdump.verbosity	int	0
sas2.host9.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host9.sctp.rtoInitial	double	3s
sas2.host9.sctp.rtoMin	double	1s
sas2.host9.sctp.rtoMax	double	60s
sas2.host9.sctp.rtoAlpha	double	0.125
sas2.host9.sctp.rtoBeta	double	0.250
sas2.host9.sctp.maxBurst	int	4
sas2.host9.sctp.assocMaxRetrans	int	10
sas2.host9.sctp.pathMaxRetrans	int	5
sas2.host9.sctp.maxInitRetrans	int	8
sas2.host9.sctp.sackPeriod	double	200ms
sas2.host9.sctp.sackFrequency	int	2
sas2.host9.sctp.reactivatePrimaryPath	bool	false
sas2.host9.sctp.sendQueueLimit	int	0
sas2.host9.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host9.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host9.sctp.hbInterval	double	30s
sas2.host9.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host9.sctp.naglePoint	int	1468
sas2.host9.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host9.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host9.sctp.ccModule	int	0	RFC4960=0
sas2.host9.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host9.sctp.arwnd	int	65535
sas2.host9.sctp.swsLimit	int	3000	Limit for SWS
sas2.host9.sctp.udpEncapsEnabled	bool	false
sas2.host9.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host9.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host9.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host9.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host9.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host9.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host9.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host9.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host9.pingApp.printPing	bool	true	dump on stdout
sas2.host9.networkLayer.ip.procDelay	double	0s
sas2.host9.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host9.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host9.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host9.ppp.ppp.mtu	int	4470
sas2.host9.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host9.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host9.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host9.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host9.eth.mac.mtu	int	1500
sas2.host9.ext.filterString	string
sas2.host9.ext.device	string
sas2.host9.ext.mtu	int	1500
sas2.host9.tcpdump.dumpFile	string	""
sas2.host9.tcpdump.threadEnable	bool	false
sas2.host9.tcpdump.snaplen	int	65535
sas2.host9.tcpdump.verbosity	int	0
sas2.host10.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host10.sctp.rtoInitial	double	3s
sas2.host10.sctp.rtoMin	double	1s
sas2.host10.sctp.rtoMax	double	60s
sas2.host10.sctp.rtoAlpha	double	0.125
sas2.host10.sctp.rtoBeta	double	0.250
sas2.host10.sctp.maxBurst	int	4
sas2.host10.sctp.assocMaxRetrans	int	10
sas2.host10.sctp.pathMaxRetrans	int	5
sas2.host10.sctp.maxInitRetrans	int	8
sas2.host10.sctp.sackPeriod	double	200ms
sas2.host10.sctp.sackFrequency	int	2
sas2.host10.sctp.reactivatePrimaryPath	bool	false
sas2.host10.sctp.sendQueueLimit	int	0
sas2.host10.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host10.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host10.sctp.hbInterval	double	30s
sas2.host10.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host10.sctp.naglePoint	int	1468
sas2.host10.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host10.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host10.sctp.ccModule	int	0	RFC4960=0
sas2.host10.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host10.sctp.arwnd	int	65535
sas2.host10.sctp.swsLimit	int	3000	Limit for SWS
sas2.host10.sctp.udpEncapsEnabled	bool	false
sas2.host10.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host10.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host10.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host10.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host10.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host10.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host10.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host10.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host10.pingApp.printPing	bool	true	dump on stdout
sas2.host10.networkLayer.ip.procDelay	double	0s
sas2.host10.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host10.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host10.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host10.ppp.ppp.mtu	int	4470
sas2.host10.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host10.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host10.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host10.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host10.eth.mac.mtu	int	1500
sas2.host10.ext.filterString	string
sas2.host10.ext.device	string
sas2.host10.ext.mtu	int	1500
sas2.host10.tcpdump.dumpFile	string	""
sas2.host10.tcpdump.threadEnable	bool	false
sas2.host10.tcpdump.snaplen	int	65535
sas2.host10.tcpdump.verbosity	int	0
sas2.host11.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host11.sctp.rtoInitial	double	3s
sas2.host11.sctp.rtoMin	double	1s
sas2.host11.sctp.rtoMax	double	60s
sas2.host11.sctp.rtoAlpha	double	0.125
sas2.host11.sctp.rtoBeta	double	0.250
sas2.host11.sctp.maxBurst	int	4
sas2.host11.sctp.assocMaxRetrans	int	10
sas2.host11.sctp.pathMaxRetrans	int	5
sas2.host11.sctp.maxInitRetrans	int	8
sas2.host11.sctp.sackPeriod	double	200ms
sas2.host11.sctp.sackFrequency	int	2
sas2.host11.sctp.reactivatePrimaryPath	bool	false
sas2.host11.sctp.sendQueueLimit	int	0
sas2.host11.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host11.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host11.sctp.hbInterval	double	30s
sas2.host11.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host11.sctp.naglePoint	int	1468
sas2.host11.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host11.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host11.sctp.ccModule	int	0	RFC4960=0
sas2.host11.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host11.sctp.arwnd	int	65535
sas2.host11.sctp.swsLimit	int	3000	Limit for SWS
sas2.host11.sctp.udpEncapsEnabled	bool	false
sas2.host11.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host11.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host11.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host11.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host11.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host11.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host11.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host11.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host11.pingApp.printPing	bool	true	dump on stdout
sas2.host11.networkLayer.ip.procDelay	double	0s
sas2.host11.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host11.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host11.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host11.ppp.ppp.mtu	int	4470
sas2.host11.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host11.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host11.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host11.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host11.eth.mac.mtu	int	1500
sas2.host11.ext.filterString	string
sas2.host11.ext.device	string
sas2.host11.ext.mtu	int	1500
sas2.host11.tcpdump.dumpFile	string	""
sas2.host11.tcpdump.threadEnable	bool	false
sas2.host11.tcpdump.snaplen	int	65535
sas2.host11.tcpdump.verbosity	int	0
sas2.host12.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host12.sctp.rtoInitial	double	3s
sas2.host12.sctp.rtoMin	double	1s
sas2.host12.sctp.rtoMax	double	60s
sas2.host12.sctp.rtoAlpha	double	0.125
sas2.host12.sctp.rtoBeta	double	0.250
sas2.host12.sctp.maxBurst	int	4
sas2.host12.sctp.assocMaxRetrans	int	10
sas2.host12.sctp.pathMaxRetrans	int	5
sas2.host12.sctp.maxInitRetrans	int	8
sas2.host12.sctp.sackPeriod	double	200ms
sas2.host12.sctp.sackFrequency	int	2
sas2.host12.sctp.reactivatePrimaryPath	bool	false
sas2.host12.sctp.sendQueueLimit	int	0
sas2.host12.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host12.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host12.sctp.hbInterval	double	30s
sas2.host12.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host12.sctp.naglePoint	int	1468
sas2.host12.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host12.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host12.sctp.ccModule	int	0	RFC4960=0
sas2.host12.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host12.sctp.arwnd	int	65535
sas2.host12.sctp.swsLimit	int	3000	Limit for SWS
sas2.host12.sctp.udpEncapsEnabled	bool	false
sas2.host12.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host12.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host12.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host12.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host12.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host12.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host12.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host12.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host12.pingApp.printPing	bool	true	dump on stdout
sas2.host12.networkLayer.ip.procDelay	double	0s
sas2.host12.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host12.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host12.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host12.ppp.ppp.mtu	int	4470
sas2.host12.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host12.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host12.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host12.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host12.eth.mac.mtu	int	1500
sas2.host12.ext.filterString	string
sas2.host12.ext.device	string
sas2.host12.ext.mtu	int	1500
sas2.host12.tcpdump.dumpFile	string	""
sas2.host12.tcpdump.threadEnable	bool	false
sas2.host12.tcpdump.snaplen	int	65535
sas2.host12.tcpdump.verbosity	int	0
sas2.host13.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host13.sctp.rtoInitial	double	3s
sas2.host13.sctp.rtoMin	double	1s
sas2.host13.sctp.rtoMax	double	60s
sas2.host13.sctp.rtoAlpha	double	0.125
sas2.host13.sctp.rtoBeta	double	0.250
sas2.host13.sctp.maxBurst	int	4
sas2.host13.sctp.assocMaxRetrans	int	10
sas2.host13.sctp.pathMaxRetrans	int	5
sas2.host13.sctp.maxInitRetrans	int	8
sas2.host13.sctp.sackPeriod	double	200ms
sas2.host13.sctp.sackFrequency	int	2
sas2.host13.sctp.reactivatePrimaryPath	bool	false
sas2.host13.sctp.sendQueueLimit	int	0
sas2.host13.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host13.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host13.sctp.hbInterval	double	30s
sas2.host13.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host13.sctp.naglePoint	int	1468
sas2.host13.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host13.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host13.sctp.ccModule	int	0	RFC4960=0
sas2.host13.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host13.sctp.arwnd	int	65535
sas2.host13.sctp.swsLimit	int	3000	Limit for SWS
sas2.host13.sctp.udpEncapsEnabled	bool	false
sas2.host13.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host13.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host13.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host13.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host13.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host13.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host13.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host13.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host13.pingApp.printPing	bool	true	dump on stdout
sas2.host13.networkLayer.ip.procDelay	double	0s
sas2.host13.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host13.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host13.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host13.ppp.ppp.mtu	int	4470
sas2.host13.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host13.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host13.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host13.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host13.eth.mac.mtu	int	1500
sas2.host13.ext.filterString	string
sas2.host13.ext.device	string
sas2.host13.ext.mtu	int	1500
sas2.host13.tcpdump.dumpFile	string	""
sas2.host13.tcpdump.threadEnable	bool	false
sas2.host13.tcpdump.snaplen	int	65535
sas2.host13.tcpdump.verbosity	int	0
sas2.host14.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host14.sctp.rtoInitial	double	3s
sas2.host14.sctp.rtoMin	double	1s
sas2.host14.sctp.rtoMax	double	60s
sas2.host14.sctp.rtoAlpha	double	0.125
sas2.host14.sctp.rtoBeta	double	0.250
sas2.host14.sctp.maxBurst	int	4
sas2.host14.sctp.assocMaxRetrans	int	10
sas2.host14.sctp.pathMaxRetrans	int	5
sas2.host14.sctp.maxInitRetrans	int	8
sas2.host14.sctp.sackPeriod	double	200ms
sas2.host14.sctp.sackFrequency	int	2
sas2.host14.sctp.reactivatePrimaryPath	bool	false
sas2.host14.sctp.sendQueueLimit	int	0
sas2.host14.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host14.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host14.sctp.hbInterval	double	30s
sas2.host14.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host14.sctp.naglePoint	int	1468
sas2.host14.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host14.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host14.sctp.ccModule	int	0	RFC4960=0
sas2.host14.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host14.sctp.arwnd	int	65535
sas2.host14.sctp.swsLimit	int	3000	Limit for SWS
sas2.host14.sctp.udpEncapsEnabled	bool	false
sas2.host14.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host14.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host14.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host14.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host14.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host14.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host14.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host14.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host14.pingApp.printPing	bool	true	dump on stdout
sas2.host14.networkLayer.ip.procDelay	double	0s
sas2.host14.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host14.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host14.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host14.ppp.ppp.mtu	int	4470
sas2.host14.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host14.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host14.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host14.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host14.eth.mac.mtu	int	1500
sas2.host14.ext.filterString	string
sas2.host14.ext.device	string
sas2.host14.ext.mtu	int	1500
sas2.host14.tcpdump.dumpFile	string	""
sas2.host14.tcpdump.threadEnable	bool	false
sas2.host14.tcpdump.snaplen	int	65535
sas2.host14.tcpdump.verbosity	int	0
sas2.host15.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host15.sctp.rtoInitial	double	3s
sas2.host15.sctp.rtoMin	double	1s
sas2.host15.sctp.rtoMax	double	60s
sas2.host15.sctp.rtoAlpha	double	0.125
sas2.host15.sctp.rtoBeta	double	0.250
sas2.host15.sctp.maxBurst	int	4
sas2.host15.sctp.assocMaxRetrans	int	10
sas2.host15.sctp.pathMaxRetrans	int	5
sas2.host15.sctp.maxInitRetrans	int	8
sas2.host15.sctp.sackPeriod	double	200ms
sas2.host15.sctp.sackFrequency	int	2
sas2.host15.sctp.reactivatePrimaryPath	bool	false
sas2.host15.sctp.sendQueueLimit	int	0
sas2.host15.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host15.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host15.sctp.hbInterval	double	30s
sas2.host15.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host15.sctp.naglePoint	int	1468
sas2.host15.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host15.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host15.sctp.ccModule	int	0	RFC4960=0
sas2.host15.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host15.sctp.arwnd	int	65535
sas2.host15.sctp.swsLimit	int	3000	Limit for SWS
sas2.host15.sctp.udpEncapsEnabled	bool	false
sas2.host15.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host15.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host15.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host15.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host15.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host15.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host15.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host15.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host15.pingApp.printPing	bool	true	dump on stdout
sas2.host15.networkLayer.ip.procDelay	double	0s
sas2.host15.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host15.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host15.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host15.ppp.ppp.mtu	int	4470
sas2.host15.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host15.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host15.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host15.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host15.eth.mac.mtu	int	1500
sas2.host15.ext.filterString	string
sas2.host15.ext.device	string
sas2.host15.ext.mtu	int	1500
sas2.host15.tcpdump.dumpFile	string	""
sas2.host15.tcpdump.threadEnable	bool	false
sas2.host15.tcpdump.snaplen	int	65535
sas2.host15.tcpdump.verbosity	int	0
sas2.host16.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host16.sctp.rtoInitial	double	3s
sas2.host16.sctp.rtoMin	double	1s
sas2.host16.sctp.rtoMax	double	60s
sas2.host16.sctp.rtoAlpha	double	0.125
sas2.host16.sctp.rtoBeta	double	0.250
sas2.host16.sctp.maxBurst	int	4
sas2.host16.sctp.assocMaxRetrans	int	10
sas2.host16.sctp.pathMaxRetrans	int	5
sas2.host16.sctp.maxInitRetrans	int	8
sas2.host16.sctp.sackPeriod	double	200ms
sas2.host16.sctp.sackFrequency	int	2
sas2.host16.sctp.reactivatePrimaryPath	bool	false
sas2.host16.sctp.sendQueueLimit	int	0
sas2.host16.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host16.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host16.sctp.hbInterval	double	30s
sas2.host16.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host16.sctp.naglePoint	int	1468
sas2.host16.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host16.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host16.sctp.ccModule	int	0	RFC4960=0
sas2.host16.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host16.sctp.arwnd	int	65535
sas2.host16.sctp.swsLimit	int	3000	Limit for SWS
sas2.host16.sctp.udpEncapsEnabled	bool	false
sas2.host16.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host16.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host16.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host16.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host16.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host16.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host16.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host16.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host16.pingApp.printPing	bool	true	dump on stdout
sas2.host16.networkLayer.ip.procDelay	double	0s
sas2.host16.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host16.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host16.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host16.ppp.ppp.mtu	int	4470
sas2.host16.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host16.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host16.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host16.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host16.eth.mac.mtu	int	1500
sas2.host16.ext.filterString	string
sas2.host16.ext.device	string
sas2.host16.ext.mtu	int	1500
sas2.host16.tcpdump.dumpFile	string	""
sas2.host16.tcpdump.threadEnable	bool	false
sas2.host16.tcpdump.snaplen	int	65535
sas2.host16.tcpdump.verbosity	int	0
sas2.host17.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host17.sctp.rtoInitial	double	3s
sas2.host17.sctp.rtoMin	double	1s
sas2.host17.sctp.rtoMax	double	60s
sas2.host17.sctp.rtoAlpha	double	0.125
sas2.host17.sctp.rtoBeta	double	0.250
sas2.host17.sctp.maxBurst	int	4
sas2.host17.sctp.assocMaxRetrans	int	10
sas2.host17.sctp.pathMaxRetrans	int	5
sas2.host17.sctp.maxInitRetrans	int	8
sas2.host17.sctp.sackPeriod	double	200ms
sas2.host17.sctp.sackFrequency	int	2
sas2.host17.sctp.reactivatePrimaryPath	bool	false
sas2.host17.sctp.sendQueueLimit	int	0
sas2.host17.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host17.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host17.sctp.hbInterval	double	30s
sas2.host17.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host17.sctp.naglePoint	int	1468
sas2.host17.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host17.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host17.sctp.ccModule	int	0	RFC4960=0
sas2.host17.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host17.sctp.arwnd	int	65535
sas2.host17.sctp.swsLimit	int	3000	Limit for SWS
sas2.host17.sctp.udpEncapsEnabled	bool	false
sas2.host17.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host17.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host17.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host17.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host17.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host17.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host17.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host17.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host17.pingApp.printPing	bool	true	dump on stdout
sas2.host17.networkLayer.ip.procDelay	double	0s
sas2.host17.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host17.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host17.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host17.ppp.ppp.mtu	int	4470
sas2.host17.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host17.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host17.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host17.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host17.eth.mac.mtu	int	1500
sas2.host17.ext.filterString	string
sas2.host17.ext.device	string
sas2.host17.ext.mtu	int	1500
sas2.host17.tcpdump.dumpFile	string	""
sas2.host17.tcpdump.threadEnable	bool	false
sas2.host17.tcpdump.snaplen	int	65535
sas2.host17.tcpdump.verbosity	int	0
sas2.host18.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host18.sctp.rtoInitial	double	3s
sas2.host18.sctp.rtoMin	double	1s
sas2.host18.sctp.rtoMax	double	60s
sas2.host18.sctp.rtoAlpha	double	0.125
sas2.host18.sctp.rtoBeta	double	0.250
sas2.host18.sctp.maxBurst	int	4
sas2.host18.sctp.assocMaxRetrans	int	10
sas2.host18.sctp.pathMaxRetrans	int	5
sas2.host18.sctp.maxInitRetrans	int	8
sas2.host18.sctp.sackPeriod	double	200ms
sas2.host18.sctp.sackFrequency	int	2
sas2.host18.sctp.reactivatePrimaryPath	bool	false
sas2.host18.sctp.sendQueueLimit	int	0
sas2.host18.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host18.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host18.sctp.hbInterval	double	30s
sas2.host18.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host18.sctp.naglePoint	int	1468
sas2.host18.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host18.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host18.sctp.ccModule	int	0	RFC4960=0
sas2.host18.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host18.sctp.arwnd	int	65535
sas2.host18.sctp.swsLimit	int	3000	Limit for SWS
sas2.host18.sctp.udpEncapsEnabled	bool	false
sas2.host18.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host18.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host18.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host18.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host18.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host18.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host18.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host18.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host18.pingApp.printPing	bool	true	dump on stdout
sas2.host18.networkLayer.ip.procDelay	double	0s
sas2.host18.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host18.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host18.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host18.ppp.ppp.mtu	int	4470
sas2.host18.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host18.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host18.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host18.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host18.eth.mac.mtu	int	1500
sas2.host18.ext.filterString	string
sas2.host18.ext.device	string
sas2.host18.ext.mtu	int	1500
sas2.host18.tcpdump.dumpFile	string	""
sas2.host18.tcpdump.threadEnable	bool	false
sas2.host18.tcpdump.snaplen	int	65535
sas2.host18.tcpdump.verbosity	int	0
sas2.host19.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host19.sctp.rtoInitial	double	3s
sas2.host19.sctp.rtoMin	double	1s
sas2.host19.sctp.rtoMax	double	60s
sas2.host19.sctp.rtoAlpha	double	0.125
sas2.host19.sctp.rtoBeta	double	0.250
sas2.host19.sctp.maxBurst	int	4
sas2.host19.sctp.assocMaxRetrans	int	10
sas2.host19.sctp.pathMaxRetrans	int	5
sas2.host19.sctp.maxInitRetrans	int	8
sas2.host19.sctp.sackPeriod	double	200ms
sas2.host19.sctp.sackFrequency	int	2
sas2.host19.sctp.reactivatePrimaryPath	bool	false
sas2.host19.sctp.sendQueueLimit	int	0
sas2.host19.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host19.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host19.sctp.hbInterval	double	30s
sas2.host19.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host19.sctp.naglePoint	int	1468
sas2.host19.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host19.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host19.sctp.ccModule	int	0	RFC4960=0
sas2.host19.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host19.sctp.arwnd	int	65535
sas2.host19.sctp.swsLimit	int	3000	Limit for SWS
sas2.host19.sctp.udpEncapsEnabled	bool	false
sas2.host19.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host19.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host19.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host19.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host19.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host19.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host19.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host19.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host19.pingApp.printPing	bool	true	dump on stdout
sas2.host19.networkLayer.ip.procDelay	double	0s
sas2.host19.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host19.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host19.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host19.ppp.ppp.mtu	int	4470
sas2.host19.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host19.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host19.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host19.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host19.eth.mac.mtu	int	1500
sas2.host19.ext.filterString	string
sas2.host19.ext.device	string
sas2.host19.ext.mtu	int	1500
sas2.host19.tcpdump.dumpFile	string	""
sas2.host19.tcpdump.threadEnable	bool	false
sas2.host19.tcpdump.snaplen	int	65535
sas2.host19.tcpdump.verbosity	int	0
sas2.host20.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host20.sctp.rtoInitial	double	3s
sas2.host20.sctp.rtoMin	double	1s
sas2.host20.sctp.rtoMax	double	60s
sas2.host20.sctp.rtoAlpha	double	0.125
sas2.host20.sctp.rtoBeta	double	0.250
sas2.host20.sctp.maxBurst	int	4
sas2.host20.sctp.assocMaxRetrans	int	10
sas2.host20.sctp.pathMaxRetrans	int	5
sas2.host20.sctp.maxInitRetrans	int	8
sas2.host20.sctp.sackPeriod	double	200ms
sas2.host20.sctp.sackFrequency	int	2
sas2.host20.sctp.reactivatePrimaryPath	bool	false
sas2.host20.sctp.sendQueueLimit	int	0
sas2.host20.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host20.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host20.sctp.hbInterval	double	30s
sas2.host20.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host20.sctp.naglePoint	int	1468
sas2.host20.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host20.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host20.sctp.ccModule	int	0	RFC4960=0
sas2.host20.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host20.sctp.arwnd	int	65535
sas2.host20.sctp.swsLimit	int	3000	Limit for SWS
sas2.host20.sctp.udpEncapsEnabled	bool	false
sas2.host20.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host20.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host20.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host20.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host20.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host20.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host20.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host20.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host20.pingApp.printPing	bool	true	dump on stdout
sas2.host20.networkLayer.ip.procDelay	double	0s
sas2.host20.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host20.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host20.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host20.ppp.ppp.mtu	int	4470
sas2.host20.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host20.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host20.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host20.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host20.eth.mac.mtu	int	1500
sas2.host20.ext.filterString	string
sas2.host20.ext.device	string
sas2.host20.ext.mtu	int	1500
sas2.host20.tcpdump.dumpFile	string	""
sas2.host20.tcpdump.threadEnable	bool	false
sas2.host20.tcpdump.snaplen	int	65535
sas2.host20.tcpdump.verbosity	int	0
sas2.host21.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host21.sctp.rtoInitial	double	3s
sas2.host21.sctp.rtoMin	double	1s
sas2.host21.sctp.rtoMax	double	60s
sas2.host21.sctp.rtoAlpha	double	0.125
sas2.host21.sctp.rtoBeta	double	0.250
sas2.host21.sctp.maxBurst	int	4
sas2.host21.sctp.assocMaxRetrans	int	10
sas2.host21.sctp.pathMaxRetrans	int	5
sas2.host21.sctp.maxInitRetrans	int	8
sas2.host21.sctp.sackPeriod	double	200ms
sas2.host21.sctp.sackFrequency	int	2
sas2.host21.sctp.reactivatePrimaryPath	bool	false
sas2.host21.sctp.sendQueueLimit	int	0
sas2.host21.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host21.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host21.sctp.hbInterval	double	30s
sas2.host21.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host21.sctp.naglePoint	int	1468
sas2.host21.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host21.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host21.sctp.ccModule	int	0	RFC4960=0
sas2.host21.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host21.sctp.arwnd	int	65535
sas2.host21.sctp.swsLimit	int	3000	Limit for SWS
sas2.host21.sctp.udpEncapsEnabled	bool	false
sas2.host21.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host21.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host21.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host21.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host21.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host21.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host21.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host21.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host21.pingApp.printPing	bool	true	dump on stdout
sas2.host21.networkLayer.ip.procDelay	double	0s
sas2.host21.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host21.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host21.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host21.ppp.ppp.mtu	int	4470
sas2.host21.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host21.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host21.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host21.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host21.eth.mac.mtu	int	1500
sas2.host21.ext.filterString	string
sas2.host21.ext.device	string
sas2.host21.ext.mtu	int	1500
sas2.host21.tcpdump.dumpFile	string	""
sas2.host21.tcpdump.threadEnable	bool	false
sas2.host21.tcpdump.snaplen	int	65535
sas2.host21.tcpdump.verbosity	int	0
sas2.host22.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host22.sctp.rtoInitial	double	3s
sas2.host22.sctp.rtoMin	double	1s
sas2.host22.sctp.rtoMax	double	60s
sas2.host22.sctp.rtoAlpha	double	0.125
sas2.host22.sctp.rtoBeta	double	0.250
sas2.host22.sctp.maxBurst	int	4
sas2.host22.sctp.assocMaxRetrans	int	10
sas2.host22.sctp.pathMaxRetrans	int	5
sas2.host22.sctp.maxInitRetrans	int	8
sas2.host22.sctp.sackPeriod	double	200ms
sas2.host22.sctp.sackFrequency	int	2
sas2.host22.sctp.reactivatePrimaryPath	bool	false
sas2.host22.sctp.sendQueueLimit	int	0
sas2.host22.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host22.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host22.sctp.hbInterval	double	30s
sas2.host22.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host22.sctp.naglePoint	int	1468
sas2.host22.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host22.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host22.sctp.ccModule	int	0	RFC4960=0
sas2.host22.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host22.sctp.arwnd	int	65535
sas2.host22.sctp.swsLimit	int	3000	Limit for SWS
sas2.host22.sctp.udpEncapsEnabled	bool	false
sas2.host22.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host22.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host22.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host22.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host22.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host22.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host22.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host22.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host22.pingApp.printPing	bool	true	dump on stdout
sas2.host22.networkLayer.ip.procDelay	double	0s
sas2.host22.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host22.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host22.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host22.ppp.ppp.mtu	int	4470
sas2.host22.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host22.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host22.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host22.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host22.eth.mac.mtu	int	1500
sas2.host22.ext.filterString	string
sas2.host22.ext.device	string
sas2.host22.ext.mtu	int	1500
sas2.host22.tcpdump.dumpFile	string	""
sas2.host22.tcpdump.threadEnable	bool	false
sas2.host22.tcpdump.snaplen	int	65535
sas2.host22.tcpdump.verbosity	int	0
sas2.host23.sctp.numGapReports	int	3	====== SCTP Association Parameters =================================
sas2.host23.sctp.rtoInitial	double	3s
sas2.host23.sctp.rtoMin	double	1s
sas2.host23.sctp.rtoMax	double	60s
sas2.host23.sctp.rtoAlpha	double	0.125
sas2.host23.sctp.rtoBeta	double	0.250
sas2.host23.sctp.maxBurst	int	4
sas2.host23.sctp.assocMaxRetrans	int	10
sas2.host23.sctp.pathMaxRetrans	int	5
sas2.host23.sctp.maxInitRetrans	int	8
sas2.host23.sctp.sackPeriod	double	200ms
sas2.host23.sctp.sackFrequency	int	2
sas2.host23.sctp.reactivatePrimaryPath	bool	false
sas2.host23.sctp.sendQueueLimit	int	0
sas2.host23.sctp.validCookieLifetime	double	10s	====== Testing =====================================================
sas2.host23.sctp.enableHeartbeats	bool	true	====== Heartbeats ==================================================
sas2.host23.sctp.hbInterval	double	30s
sas2.host23.sctp.nagleEnabled	bool	true	====== Nagle Algorithm =============================================
sas2.host23.sctp.naglePoint	int	1468
sas2.host23.sctp.fastRecoverySupported	bool	true	====== Congestion Control ==========================================
sas2.host23.sctp.sctpAlgorithmClass	string	"SCTPAlg"
sas2.host23.sctp.ccModule	int	0	RFC4960=0
sas2.host23.sctp.ssModule	int	0	ROUND_ROBIN=0
sas2.host23.sctp.arwnd	int	65535
sas2.host23.sctp.swsLimit	int	3000	Limit for SWS
sas2.host23.sctp.udpEncapsEnabled	bool	false
sas2.host23.pingApp.destAddr	string	""	destination IP or IPv6 address
sas2.host23.pingApp.srcAddr	string	""	source IP or IPv6 address (useful with multi-homing)
sas2.host23.pingApp.packetSize	double	56B	of ping payload, in bytes
sas2.host23.pingApp.interval	double	1s	time to wait between pings (can be random)
sas2.host23.pingApp.hopLimit	double	32	TTL or hopLimit for IP packets
sas2.host23.pingApp.count	double	0	stop after count ping requests, 0 means continuously
sas2.host23.pingApp.startTime	double	uniform(0s,this.interval)	send first ping at startTime
sas2.host23.pingApp.stopTime	double	0s	send no pings after stopTime, 0 means forever
sas2.host23.pingApp.printPing	bool	true	dump on stdout
sas2.host23.networkLayer.ip.procDelay	double	0s
sas2.host23.networkLayer.arp.retryTimeout	double	1s	number seconds ARP waits between retries to resolve an IP address
sas2.host23.networkLayer.arp.retryCount	int	3	number of times ARP will attempt to resolve an IP address
sas2.host23.networkLayer.arp.cacheTimeout	double	120s	number seconds unused entries in the cache will time out
sas2.host23.ppp.ppp.mtu	int	4470
sas2.host23.eth.mac.promiscuous	bool	false	if true, all packets are received, otherwise only the ones with matching destination MAC address
sas2.host23.eth.mac.address	string	"auto"	MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
sas2.host23.eth.mac.txrate	double	100Mbps	maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
sas2.host23.eth.mac.duplexEnabled	bool	true	whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
sas2.host23.eth.mac.mtu	int	1500
sas2.host23.ext.filterString	string
sas2.host23.ext.device	string
sas2.host23.ext.mtu	int	1500
sas2.host23.tcpdump.dumpFile	string	""
sas2.host23.tcpdump.threadEnable	bool	false
sas2.host23.tcpdump.snaplen	int	65535
sas2.host23.tcpdump.verbosity	int	0

Source code:

module Internet extends oversim.underlay.reaseunderlay.ReaSEUnderlayNetworkBase
{
    parameters:
        @Internet();
    submodules:
        tas0: TAS0 {
            parameters:
                @AS();
                @display("i=misc/globe_s");
        }
        sas1: SAS1 {
            parameters:
                @AS();
                @display("i=misc/cloud_s");
        }
        sas2: SAS2 {
            parameters:
                @AS();
                @display("i=misc/cloud_s");
        }

    connections:
        tas0.pppg++ <--> stub2transit <--> sas1.pppg++;
        tas0.pppg++ <--> stub2transit <--> sas2.pppg++;
        sas1.pppg++ <--> stub2stub <--> sas2.pppg++;

}